Electrical Adjustment; General Information; Operation - Pioneer CDJ-1000 Service Manual

CDJ-1000
6.4 ELECTRICAL ADJUSTMENT
@) VCO Free-running Adjustment Objective : To optimize the VCO free-running frequency
When not properly adjusted :
ee + Master Tempo does not function normally.
* TEMPO display does not become the same as that
— of actual voice tempo.
« Power ON G
« None disc
+ The position of TEMPO
slider is set to Ow
MAIN ASSY
DC voltage
|
+ DOUT OFF
© vreo1
2.540.2V
MAIN ASSY Probe (10:1) F
Oscilloscope
VCO IN V: 50mV/div.
H: 10msec/div.
GND 7
DC mode
58
CDJ-1000
7.1 GENERAL INFORMATION
7.1 DIAGNOSIS
7.1.1 SERVICE MODE
7.1.1.1 HOW TO START / CANCEL SERVICE MODE
(fl fe) Release
POWER OFF IWADJUST TEMPG = =POWER ON INADJUST 'TEMPO
SERVICE MODE : CANCEL
POWER OFF
7.1.1.2 OPERATION IN SERVICE MODE
* In the service mode, can check "LED and FL displays" partially as follows.
* In addition, it lights while pressing the key.
LED CHECK
Key Name LED lighting
@ HOT CUE -A CA | (Green)
@HOTCUE-B. (Green)
G: HOT CUE -C
@: REC MODE
& DIRECTION (SW)
@ CUE
«2 MASTER TEMPO
MASTER TEMPO
43 TEMPO RESET | =
i TEMPO RESET
59