Table of Contents
Advertisement
Case Disassembly & PCB
Access~~~~~-
Case Disassembly
&
PCB Access
Turn off the transceiver, and disconnect all
cables.
Main Unit Access ( top
&
botto1n)
0 Referring to figure 1, remove the eight
screws from the top cover to expose the sol-
der side of the Main Unit.
0 Remove the four screws from the bottom
cover, to expose the
component (PCB
unit's) side of the Main Unit (Figure 2).
0 Unplug the speaker wire connector from
Jl006 on the Main Unit, and lift the loud-
speaker out of it's bracket, as shown in Fig-
ure 3.
0 Remove the screw affixing the speaker
bracket and remove the bracket.
PCB locations are indicated in Figure 4.
Figure 1.
MAIN Unit
Figure 4.
Figure 2.
-~-IF
Unit
MUTE Unit
'-'=*+--MIG AMP Unit
1-2------------------------------------------------~----------------
FT-2200 Technictll Supplement
Advertisement
Table of Contents
