Sony FD Trinitron WEGA KV-32HV600 Operating Instructions Manual page 21

Cable Box Only For best results, use this connection if:
Your cable company scrambles all channels, which requires you
to use a cable box.
You do not have a VCR. (If you have a VCR, see pages 22 and 24.)
Use the TV remote control to change channels coming through
the cable box to the TV's VHF/UHF jack. (You must first
program the remote control for your specific cable box.)
With this connection, all channelscomeinto the TVthrough your cable box and only one
unscrambledsignal is sent to the TV,so you cannot use the duat picture features.,tf
someof your channelsarescrambled, but othersare not, considerusing the "Cable Box
and Cable" connectionon page 18 instead.
Toconnect the cane box
1 Connect the CATV cable to the cable box's input jack.
2 Use a coaxial cable to connect the cable box's outcput jack to the
TV's VHF/UHF jack.
3 Run the Auto Setup program, as described in "Setting Up the
Channel List" on page 38.
CAW Coaxia_ cable
cable
N _ OUT
Notes on Usin_ This Connection
Use the cable box Tune the TV to the channel the cable box is set to (usually
channel 3 or 4)
and then use the cable box to switch channels.
Set up _he Tv remote control Pr0gram the remote contr(iil See ;;Priigrammlng the Rem(ite Ciintriii;; iin
to operate the cable box pages 43-44.
Activate the remote control to
Press SAT/CAgLE FUNCTION
operate the cable box
Prevent the accidental When using the cable box, you need the TV to stay on the channel the cable
switching of TV channels box is set to (usually channel 3 or 4). You can use the TV's Channel Fix
feature to lock in a specific channel. For details, see "Using the Channel
Menu" on page 68.