Sony FD Trinitron WEGA KV-32HS500 Operating Instructions Manual page 81

Video
No picture _ If your TV does not turn on, and a red light keeps flashing, your TV may
(screen not lit), no sound need service. Call your local Sony Service Center.
Make sure the power cord is plugged in.
Press the POWERbutton on the front of the TV.
Press the TVNIDE 0 button to cycle through the connected video sources.
Dark, poor or no _ Adjust the Picture option in the Video Menu (see page 62).
picture (screen lit), _ Adjust the Bdght/_ess option in the Video Menu (see page 62).
good sound _ Check the antenna/cable colmections.
Only snow and noise 3 Check the antenna/cable cormections.
appear on the screen _ Try another channel; it could be station trouble.
Dotted lines _ Adjust the antenna.
or stripes _ Move the TV away from noise sources such as cars, neon signs, or hair-
dryers.
Double images or ghosts r_ Using a highly directional outdoor antenna or a cable may solve the
problem.
"Black box" on screen _ You have selected a text option in the Setup Menu and no text is available.
(See page 72 to reset Setup selections.) To turn off this feature, set the
Caption Vison option to Off. If you were trying to select closed captioning,
select COl instead oftEXT 14.
16:9 Enhanced feature _ If the Auto setting does not automatically detect the 16:9 signal from your
DVD player, select On to manually turn on the 16:9 Enhanced feature. For
Audio
Good picture, _ Press MUTING so that the word Muting disappears from the screen (see page
no sound 41)).
................................................................................. suretl e t!!0!' aua! Men ! eePag f 5): ......
• • • • ¢
Cannot gain enough volume _ Increase the volume of the cable box using the cable box s remote control.
when using a cable box Then_ . .................................................................................................... press [V _UNCT/0N and adjust the TV s......................................................................................... volume.
Sound seems weak or _ The TV's audio might be set to Auto SAP or Mono, when it might be better set
insufficient to Stereo. In the Audio Menu (see page 64), set the MTS setting to Stereo. If
already set to Stereo, switch to Mono (which may reduce background noise
during weak stereo broadcasts).
Cannot raise the volume on 3 If the Speaker option is set to Off and the Audio Out option is set to Fixed (in
external audio speakers order to output the sound to your audio system) use your audio receiver to
adjust the sound (see page 64). Or, to use the TV remote control, set the
Audio Out option to Vad(_ble.
.............................................................................................................
T_! turn!!
th'_ TV sPeaker
s se_ th'_ _Pta I!t' !_F_t!!!_ t!)q!_ !se_ P agy61
) .......................