Sony FD Trinitron WEGA KV-32HS500 Operating Instructions Manual page 21

Cable Box Only
For best results, use this connection if:
Your cable company scrambles all channels, which requires you
to use a cable box.
You do not have a VCR. (If you have a VCR, see pages 22 and 24.)
With this connection you can:
Use the TV remote control to change channels coming through
the cable box to the TV's VHF/UHF jack. (You must first
program the remote control for your specific cable box.)
With this connection, all channelscomeinto the TVthrough your cable box and only one
unscrambledsignal is sent to the W, soyou cannot usethe TwinView feature. If someof
your channelsare scrambled, but othersare not, considerusing the "Cable Boxand
Cable" connection on page 18 instead. Fordetails about Twin View, see page46,
To connect the cable box
1 Connect the CATV cable to the cable box's input jack.
2 Use a coaxial cable to connect the cable box's outcput jack to the
TV's VHF/UHF jack.
3 Run the Auto Setup program, as described in "Setting Up the
Channel List" on page 38.
CAW
Coaxialcable
cable
Notes on Using This Connection
Use the cable box Tune the TV to the channel the cable box is set to (usually channel 3 or 4)
and then use the cable box to switch channels.
Set up the TV remote control Program the remote control. See "Programming the Remote Control" on
to operate the cable box pages 43-44.
Activate the remote control to Press SAT/CA[_I.E FUNCTION
operate the cable box
Prevent the accidental When using the cable box, you need the TV to stay on the channel the cable
switching of TV channels box is set to (usually channel 3 or 4). You can use the TV's Channel Fix
feature to lock in a specific channel. For details, see "Using the Channel
Menu" on page 66.