Sony FD Trinitron WEGA KV-32HS500 Operating Instructions Manual page 26
Hide thumbs
Also See for FD Trinitron WEGA KV-32HS500:
- Operating instructions manual (91 pages) ,
- Instructions manual (12 pages) ,
- Brochure (2 pages)
Table of Contents
Advertisement
m
4
1
CAW
cable
AIV cable
_
_@
Notes on Using This Connection
Watch cable (unscrambled)
Press TV/VIDEO repeatedly
to select the cable input (UIIF/VIIF
in the
channels
illustration).
Watch cable box (scrambled)
Turn on the VCR and tune it to the channel
the cable box is set to (usually
channels
channel
3 or 4). Press TV/VDE0 repeatedly
to select the VCR input (VIDEO 1
in the illustration).
Use the cable box to change channels.
Watch the VCR
Press IV/VIDE0 repeatedly
to select the VCR input (VIDEO 1 in the
illustration).
Set up the TV remote control
If you have a non-Sony
VCR, you must program
the remote control. See
to operate
the cable box or
"Programming
the Remote Control"
on pages 4,3-44.
VCR
Activate the remote control to
For the cable box, press SAT/CABLZ FUNCTION, For the VCR, set the A/V slide
operate
the cable box or VCR
switch to the position
you programmed
for the VCR. Then press VCR/DVD
FUNCTION,
Control specific cable box and
See
Operating
a Cable Box
on page 59 and
Operatilg
a VCR
on page 58.
VCR functions
with the TV
remote control
Label video inputs
to easily
See the instructions
for setting up Video Labels on pages 72-73.
identify equipment
connected
to the TV
25
Advertisement
Table of Contents
