Playbackon A Tvscreen; Copyingyourrecordings To An External Videorecorder - Canon ZR960 Instruction Manual

Playbackon a TVScreen
The quality of the playback picture will
vary depending on the connected TV
and the type of connection used.
switch:
_ POINTS TO CHECK
Before making the connections, select the
[TV TYPE] setting according to the TV set
to which you will connect the camcorder
([:Z3 47).
Connecting
Connect the camcorder to the TV
following one of the connection
diagrams shown in Connection
Diagrams (LT_J 3 9).
Playback
1
Turn on the camcorder and the
connected TV or VCR.
On a TV: Select as the video input
the same terminal to which you
connected the camcorder.
On a VCR: Set the input selector to
the external video input (usually
labeled LINE IN).
2 Start the playback (L_ 27).
• Turn off all the devices before starting
the connections.
• We recommend powering the
camcorder using the compact power
adapter.
CopyingyourRecordings to an External
VideoRecorder
You can copy your recordings by
connecting the camcorder to a VCR or
a digital video device. When recording
to a digital video recorder using the DV
terminal, you can copy recordings with
virtually no generation loss in video and
sound quality.
switch: I
Connecting
Connect the camcorder to a VCR or
other analog device using connection
type Igl, or to a DVD recorder or other
digital recording device using
connection type I_11, as shown in
Connection Diagrams (CY.3 39).
Recording
This camcorder: Load the
recorded cassette.
1
2
Connected device: Load a blank
cassette or disc and set the device
to record pause mode.
3 This camcorder: Locate the scene
you wish to copy and pause the
playback shortly before the scene.
4 This camcorder: Resume the
movie playback.
When using an analog connection
you can include in the copy also the
date/time of the original recording
(1_ 28).
5 Connected device: Begin
recording when the scene you
wish to copy appears. Stop
recording when copying is
complete.
6
This camcorder: Stop playback.
40 • ExternalConnections