Table of Contents
Advertisement
Opening
and c lo s i n g
Operation
Applies to: vehicles with garage door opener (Homelink)
Fig. 43
Headlin er: cont rol uni t
Requirement: The buttons in the roof headliner
must be programmed
Q
page
46 or
¢
page
47 and the vehicle must be within
range of the system, such as the garage door
ope ner.
• Press the button to open the garage door . The
LED@ blinks or turns on .
• Press the button again to close the garage
door .
@
Tips
To open o r close the garage door, press the
button, but do not hold it fo r longer t han
10 seconds or t he ga rage door opener module
will switch to prog ramming mode.
Programming the buttons (version A)
Applies to: vehicles with ga rage doo r opener (Homeli nk}
You can program both fixed code and rolling code
systems using this procedure .
Programming or reprogramming
buttons
• Switc h the ign ition on.
• Press and hold the but t on in the roof headline r
¢
page
46,
fig.
43 that you would like to pro-
gram fo r at least 10 seconds. Or
• Select :
ICAR I
function button>
Car sys tem s*
cont ro l button >
Vehicle sett ings > Garage
door opener> Program garage door opener.
If
th is path is not available, program the button
as descr ibed in version B ¢
page
47.
• Follow the inst ructions in the MMI*.
46
Erasing button programm ing
The prog rammed but t ons cannot be erased ind i-
vidually . They must a ll be erased toge t her . Re-
program the buttons if necessary.
• Sele ct:
I
CAR
I
func t ion button >
Car syst ems*
contr ol button >
Vehicle setting s > Garage
door opener > Clear program setting s > Yes.
Displaying the version / status/country
code
• Select:
! CAR !
function button>
Car systems *
cont rol button >
Vehicle setting s > Garage
door opener > Version informa t ion.
@
Tips
- Prog ramming through the MMI* is not pos-
sible wit h all infot ainm en t systems. If th is
is the case, program the buttons as descri-
bed in vers ion B ¢
page
47 .
- The required distance between the hand
transmitte r and the Homelink module in
the radiator grille ¢
page
47,
fig.
44 de -
pends on the system that you are program-
ming.
- Depending on the mode l of the system, you
may need to release the button on the re-
mote contro l dur ing programming and
press it again. Hold each position you try for
at least 15 seconds before trying another
posit ion . Keep the turn s ignals on your vehi -
cle in view when doing this .
- After programm ing the garage door opener,
it may be necessary to synchron ize the mo-
tor with the syst em . Refer to the manufac-
t urer 's inst ruct ions.
Advertisement
Table of Contents
