Interrupting, Changingor Cancellinga Cycle - Bosch SHV 6800 Use And Care Manual

INTERRUPTJ[NG, CHANGING OR CANCELI
TNG A CYCLE
Cycle Interruption
As a safety feature the dishwasherwill automatically
turn itself off whenever the door isopened. However,
if the door is opened quicklywhile in a wash or rinse
cyclesome water may splashout of the dishwasher.
Forthis reason it is recommendedthat the machine
alwaysbe swibched off bL:_ore openingthe door.
To Tnterrupt a Cycle
1. Pressthe on/off button to stop operation.
2, Wait at least 10 seconds(or until the water noises
stop) before opening the door,
To Resume a Cycle
I. SHU/SHI models, close thedoor and
press the on/off button.
2. SHV models, push the on/off button
and close the door.
Changing a Cycle
For Bosch dishwashermodels SH16800 and 4320,
SHU 5300, 5310 and 6800 press the program
button of the desired cycle TWICE. For all other
Bosch dishwasher models, press the program
button of the desired cycle ONCE. The chosen
cycle button (or the light above it) becomes illu-
minated, showing that it has been selected.
* SHU 3030 and SHU 3130 models do not have
program lights.
Cancelling a Cycle
Eachcontrol panel shows which buttons to simulta-
neously push to cancel a cycle. Refer to your dish-
washer to find the cancel drain buttons on your par-
ticular model.
1. _ess the indicated buttons at the same
time and hold for approximately 3 seconds.
2. When the drain pump noisesstop and the
LED display or dean light indicate that the
end of the cycle has been reached, the dish
washer is reset.
3. Pressthe on/off button to turn the
dishwasheroff.
4. The dishwasheris now ready to run a
selected cycle. Add more detergent if
necessary.
ON/OFF BUTTON
L
Figure 27
CHANGE CYCLE
0 0 _i 0
°_"
Figure 28
CANCEL CYCLE
o 0
Figure 29
20 - ENGLISH www.boschappliances.com