Program Options And Unloading - Bosch SHV 6800 Use And Care Manual

PROGRAM OPTIONS & UNLOADING
Program Feablres for Inl_cjra lid.
Wash Ught is illuminated when anywash cycle is in
operation up until the oompletlon of bhefinaldnse cycle.
Dry Light is illuminated during the condensation
drying phase.
Clean Light is illuminated when the dishes are
cleaned, dried and ready to be unloaded.
I Wash Dry Clean ]
• 0 0
Condensation Drying
The combination of a high final rinse tempera-
ture, the tub's cool stainless steel interior and
the sheeting action of a Rinse Agent result in
effective and efficient drying. The closed con-
densation drying feature is hygienic, and saves
energy and money.
Figure 30
Note: For BEST DRYING results, it is essential to
use a RINSE AGENT and keep the Rinse
Dispenser FULL. (See Figure 31).
Additional Drying Temperature
for Models SHU995215/6UC:
I. Open the door, hold down the "Regular" but-
ton and simultaneously turn the dishwasher on.
The display will blink with a code of "0" or "1".
Release the buttons. You are in program mode.
2. If the display blinks with a "0'_ you are programmed
for a lower temperature rinse. If the display blinks
with a "I", you are programmed for a higher tem-
perature rinse, thus improving dish drying.
3. To change the program code, press the _Regu-
lar" button.
4-.When you have the desired code selected, turn
the dishwasher off to take it out of program mode.
• Note: For the SHV 6800 models, push "Power
Scrub" button in lieu of "Regular" button.
Unloading
When unloading the dishwasher always unload the
lower rack first and then unload the upper rack. This
will minimize the chance of water drops from the
upper rack falling on the dishes in the lower rack.
The silverware basket(s) of the Bosch dishwasher
can be removed for easy unloading.
The dishware tends to get hot immediately following
a completed cyde. If the door is opened slightly for
a few minutes before unloading, the disheswill cool
more quickly.
Figure 31
figure 32
www.boschappllances.com
ENGLISH - 21