3.14 PLL52... module (optional)
Warnings
To avoid accidents, material or environmen-
tal damage, observe the following instruc-
tions!
WARNING
Avoid opening, modifying or forcing the de-
vice.
All interventions (assembly and installation operations,
assistance, etc.) must be carried out by qualified personnel.
Falls and collisions can negatively affect the safety func-
tions. In this case, the unit must not be operated, even if it
displays no evident damage.
Assembly notes
•
Check the relevant national safety standards are respected.
3.14.1 Terminal ratings, cable lengths and cross-
sectional areas
Cable lengths / cross-sectional areas
Electrical connection "X89"
Cable lengths
Cross-sectional areas
Analog inputs
Air temperature detector
Flue gas temperature
QGO20...
Interface
20205511
Technical description of the burner
Screw terminals up to max. 2.5
2
mm
10 m fino a QGO20...
Refer to description of QGO20...
Pt1000 / LG-Ni1000
Pt1000 / LG-Ni1000
Refer to data sheet N7842
Communication bus for LMV52...
Tab. J
S9902
Technical data
Model
Mains voltage "X89-01"
Safety class
Mains frequency
Power consumption
Degree protection
Transformer AGG5.220
- Primary side
- Secondary side
Environmental conditions:
Storage
Climatic conditions:
Mechanical conditions:
Temperature range:
Humidity:
Transport
Climatic conditions:
Mechanical conditions:
Temperature range:
Humidity:
Operation
Climatic conditions:
Mechanical conditions:
Temperature range:
Humidity:
NOTE:
For detailed information, refer to the specific manual of
PLL52 module.
Condensation, formation of ice and the entrance
of water are not permitted!
WARNING
16
GB
PLL52...
AC 230 V -15%/10%
I class with parts according to II
class (DIN EN 60730-1)
50 / 60 Hz ±6 %
Ca. 4 VA
IP54, housing closed
AC 230V
AC 12 V (3x)
DIN EN 60721-3-1
Class 1K3
Class 1M2
-20...+60 °C
<95% r.h.
DIN EN 60721-3-2
Class 2K2
Class 2M2
-25...+70 °C
<95% r.h.
DIN EN 60 721-3-1
Class 3K5
Class 3M2
-20...+60 °C
< 95% r.h.
Fig. 8
Tab. K