Advertisement
Network Settings - IP Address
The IP addresses for the stations can be individually set for each station or they can be configured in a batch. This guide will show how
to assign via the batch configuration. Navigate to Network Settings, IP Address, then click on
Batch IP Address Configuration
On the Batch IP Address Configuration page, enter a starting IP address and subnet mask. Check the box beside each station or
click
to check all stations at once. Click
Select
IP address and Subnet Mask assigned to it.
4
, then click
on the confirmation pop‑up. Each station will now have an
OK
OK
Batch IP Address Configuration
If a Default Gateway
address is required, it can
be manually added on this
page once the IP addresses
have been assigned.
Advertisement
