Replacing Battery - Rinnai CNTRLDRCIZHAW Operation And Configuration Manual

Air conditioning control system
Table of Contents

Advertisement

WARNING KEEP BATTERIES OUT OF REACH OF CHILDREN.
Swallowing may lead to serious injury in as little as 2 hours or death, due to chemical burns
and potential perforation of the oesophagus.
If you suspect your child has swallowed or inserted a button battery immediately call the
24-hour Poisons Information Centre on 13 11 26 for fast, expert advice.
Examine devices and make sure the battery compartment is correctly secured, e.g.
that the screws or other mechanical fasteners are tight. DO NOT use if compartment is not secure.
Dispose of used button batteries immediately and safely. Flat batteries can still be dangerous and may be a choking hazard.
Inform others about the risk associated with button batteries and how to keep their children safe.
Remove the batteries if the remote is not going to be use for prolonged periods. This will help prevent damage from leaking
batteries. If leakage has occurred and corrosion is evident the remote will need to be replaced.
Leaking chemicals are toxic and MUST NOT be touched or ingested.
NEVER mix old and new batteries.
DO NOT immerse the remote control in any liquid, this will damage the remote control, rendering it inoperable and voiding
its warranty.
Button batteries provide power to the wireless zone temperatures sensor shown below.

REPLACING BATTERY

To replace battery, remove face
of controller. Then insert
flathead screwdriver into the
side slot and push forward.
Rinnai
Wireless Sensor
Remove front cover from sensor
CR2032
17
Remove battery and
replace with new one.
Air Conditioning Control System OM

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cntrldrcizhab

Table of Contents