Please read this manual carefully before installing, powering up, operating and maintenance of this product. Follow safety instructions in this manual and on the product. If you have any questions, please seek help from Absen. Beware of Electric Shock! • To prevent electric shock the device must be properly grounded during installation.
Page 4
• Ensure all components and steel frames are securely installed. • When installing, repairing, or moving the product, ensure the working area is free of obstacles, and ensure the working platform is securely and stably fixed. KL Series Product User Manual...
Page 5
• Any component that has a recycling bin label can be recycled. • For more information on collecting, reusing and recycling, please contact the local or regional waste management unit. • Please contact us directly for detailed environmental performance information. KL Series Product User Manual...
The KL series products support complete front and rear installation & front and rear maintenance. KL series is mainly used in government and enterprises, hotels, retailers and commercial real estate and other application fields.
Page 7
The design is light and thin, the weight of a single cabinet is only 7.8 kg and the thickness is only 60 mm. ⚫ KL series cabinets are made of die-cast aluminum alloy with high precision, good flatness and difficult deformation. ⚫...
Page 8
IP40/IP21 IP40/IP21 IP40/IP21 IP40/IP21 IP40/IP21 IP40/IP21 LED Lifetime (H) 100000 100000 100000 100000 100000 100000 100000 Module Maintenance Front or Rear PSU & Others Maintenance Front or Rear Panel Installation Type Stacking, Wall mounting, Rigging KL Series Product User Manual...
Page 9
1.3 Cabinet dimension figure Cabinet dimension drawing 1.4 Module dimension figure 320mmx160mm KL Series Product User Manual...
Product Components 2.1 Cabinet Cabinet module cover Mounting hole Module Upper and lower splicing screw holes of cabinet Switching power Power box Receiving card Left and right splicing screw holes of cabinet Rear view Front view KL Series Product User Manual...
Page 11
1m. length of 1m. • Maintenance and installation accessories: Front maintenance tool Square tube connecting plate Square tube connecting screw • Packing (honeycomb cardboard box+pearl cotton: 10 in 1) Honeycomb cardboard box: 10 in 1 KL Series Product User Manual...
3. Product Installation KL series supports front mounting of backing strip and mounting of connecting plate. Front Mounting of Backing Strip ⚫ Step 1: The two rows of modules at the top and bottom of the panel can be removed in advance for front installation preparation.
Page 13
Before installation, remove the module and the back cover corresponding to the installation position. Supporting back strip mounting screws. square tube connecting plate installation ⚫ Left view Rear view of connecting plate KL Series Product User Manual...
If you have any questions, please contact the relevant manufacturers for accurate matching. Schematic diagram of cabinet interface connection Power in Power out Date1 Date2 Note: The power interface is divided into input/output. The signal interface has no input/output. KL Series Product User Manual...
Page 16
4.2 Power cable wiring KL series cabinets adopts 3×1.5mm² power line to connect distribution box or socket with the power connector in the cabinet. Maximum Maximum recommended load for single main power Type power line consumption 110V 220V KL1.2 582W/m2 KL1.5...
Wiring diagram reference Signal line AC power input Sending box 5. Maintenance 5.1 Maintenance tools KL Series Product User Manual...
Page 18
Tools for maintaining modules Tools for maintaining modules from the front from the front P1.2/1.5 P1.8/P2/P2.5/P3/P3.9 5.2 Front & Rear maintenance Module Front Maintenance: Use the matching front maintenance tool to take out the module. KL Series Product User Manual...
Page 19
The power supply and receiving card can be maintained after the power supply rear cover is opened with a screwdriver. After removing the cover plate, remove the module from the opening. After opening the rear cover, maintain the power supply and receiving card. KL Series Product User Manual...
Page 20
AC input (L/N/PE) and DC output (VCC/GND) of the power supply. If a short circuit is found, please check the circuit carefully. After ensuring the line is normal, electrify the cabinet to work. KL Series Product User Manual...
Need help?
Do you have a question about the KL Series and is the answer not in the manual?
Questions and answers