Iridium Arc Bar Pro 1215 Manual page 19

DMX MODE-In this menu,you can connect several pieces of lights with DMX cable and control
them with the control console.
Programme Menu
Press "ENTER" and then press "UP" or "DOWN" to "Address" or "DMX Channel" and press "ENTER".
1) "XXX" will be showed in "Address", "XXX" means the Address 001-512. You can press "UP" or
"DOWN"to select the address you desired.
2) "Channel [xx]" will be showed in "DMX Channels", "XX" means 5 kinds of DMX Channels Modes.
You can press "UP" or "DOWN" to select the Channel Mode you desired.
DIMMER CURVE-In this menu,you can choose the mode you desired.
1. Press "ENTER" and then press "UP" or "DOWN" to "Dimmer Curve" to choose as below
2. Press "ENTER" you can see 4 items as below:
1) Standard
2) Stage/TV
3) Architec
4) Theatre
DMX STATE-In this menu,you can choose the DMX signal you desired.
1. Press "ENTER" and then press "UP" or "DOWN" to "DMX STATE".
2. Press "ENTER" and you can choose "BLACKOUT" or "DMX HOLD"；"BLACKOUT" means cut off
the DMX signal and "DMX HOLD" means connect DMX signal.
SLAVE MODE-In this menu, you can choose one light as the MASTER light and other lights in
SLAVE Mode will run follow the MASTER light.
1. Press "ENTER" and then press "UP" or "DOWN" to "SLAVE Mode".
2. Press "ENTER" and "SLAVE" will be showed, then press "ENTER" to choose.
AUTO MODE-In this menu, you can choose your desired AUTO Mode and adjust the running
speed.
1. Press "ENTER" and then press "UP" or "DOWN" to "AUTO MODE".
2. Press "ENTER" you can see 2 items as below:
1) SPEED - It provides "01-31" for you choose.
2) AUTO MODE - It provides "AUTO 1- AUTO 13" for you choose.
STATIC COLOR-In this menu,you can choose the modes you need.
1. Press "ENTER" and then press "UP" or "DOWN" to "AUTO MODE".
2. Press "ENTER" you can see 8 items as below:
1) RED
2) GREEN
3) BLUE
4) WHITE
5) AMBER
6) UV
7) COLOR - You can choose "1-63" in this menu.
8) STROBE - You can choose "0-20" in this menu.
CCT-In this menu, you can choose the brightness you desired.
1. Press "ENTER" and then press "UP" or "DOWN" to "CCT".
2. Press "ENTER" you can chooose from "2700K" to "8000K" as you need.
SET UP-In this menu, you can adjust the values of the function.
1. Press "ENTER" and then press "UP" or "DOWN" to "SET UP".
2. Press "ENTER" and there has 6 options then press "ENTER" to choose the options and press "UP"
or "DOWN" to choose the value you desired as below:
1) IR - You can press "ON" or "OFF" to choose whether you need to controll by this mode.
2) Dimmer All - You can adjust the brightness of colors.
3) Wihte Balace - You can select "RED" "GREEN" "BLUE" "WHITE" you need.
4) Key Lock - You can choose "ON" or "OFF" to make the Key Lock turn on or off.
5) Display - You can choose "ON" or "30s" to make the position of the light screen.
6) Max temp - You can set the your desired Max working temperature of the light with passcode in this
menu.When the working temperature beyond max temperature of default settings, the color of letter
"Temp XX" will show the color from white to yellow.Meanwhile, the light will adjust the working
temperature automatically.
DMX CHANNEL
DMX MODE
ADDRESS
ADDRESS
DMX Hold
DMX State
Black out
SLAVE MODE
Auto
STATIC COLOR
STROBE
CHANNEL
003
CHANNEL
010
CHANNEL
022
CHANNEL
036
CHANNEL
050
CHANNEL
092
001
512
Slave
1
Auto
31
1
Speed
10
RED
GREED
0
BLUE
255
WHITE
0
COLOR
51
0
20
6
18
modes.