Masimo Radius VSM Quick Start Manual

Radius VSM
Q u i c k S t a r t G u i d e
System Components: Reusable Devices
Radius VSM
System Components: Disposables
Arm Band
Select size (S,M,L)
3
5
4
6 7
1
2
1
2
2
1
3
4
™
Multifunction Pod
RD CS-1 RRa® Sensor
SpO Sensor
2
(Neo or Adt)
Device Description
1. Radius VSM
2. SpO Sensor
2
3. Acoustic Sensor
4. ECG Electrodes
5. Multi-Functional
Reusable Pod and
Temperature and
Position Sensor
6. NIBP Cuff
7. NIBP Module
Setup Instructions
On Root®:
1. Make sure Bluetooth® is on.
2. Fully charge Radius VSM in the lower
Attach the Radius VSM and
Armband to patient's arm:
1. Place the VSM into the cradle.
SpO sensor:
2
1. Choose the SpO sensor.
2
2. Attach the sensor to the finger and connect the sensor to Radius VSM.
On Root:
1. Make sure Bluetooth is on.
2. Move the second Radius VSM to the
lower part of the charger so that it can
(if required)
ECG Electrodes
(If required) (If required)
1. Power Buttom &
Status Light
2. Green Accessory Port:
Connection for NIBP
Module or MFP.
3. Blue Accessory Port:
Connection for rainbow
acoustic monitoring®
Sensor
4. Release Buttons
5. Speaker
6. Patient Cable Port
3. Use this charged Radius VSM to
3
2. Snap to secure.
3. Pull armband through slot in cradle.
3. Confirm pleth and value are displayed
NIBP Module
(if required)
NIBP Cuff
(If required) Select size
(Small Ad, Ad, Large Ad)
1 2 3
4
5
6
slot of the charger.
monitor the patient.
charge while the first Radius VSM is
in use.
on Root.
4