Startup / Operation - BOMANN EBK 7941 Instruction Manual

Household- hob

Hide thumbs

Table Of Contents

Table of Contents

Available languages

• Place the hob in the prepared cut-out with the

connection cable in front and the control panel

facing forwards and press it firmly into place.

• Check that the hob is positioned properly and hor-

izontally. If there is nothing more to correct, you

can tighten the retaining clips from below to fix the

hob in place.

Electrical connection

Information for the authorized expert!

WARNING:

• The installation to the mains supply must conform

to the local standards and regulations.

• Connecting the appliance to a domestic power

socket or using multiple sockets or extension ca-

bles is not permitted.

• Improper connection may cause to an electric

shock!

• Before connecting, ensure that the power supply

corresponds with the information on the rating la-

bel (hob bottom) and the wiring diagram.

• The appliance is suitable for three-phase and AC

current.

• Select a suitable cord as mains cable, considering

the connection type and rated power of the unit.

• Fix the mains cable in the tension relief.

• The electrical installation of the appliance should

be equipped with an emergency switch, which

switches off the whole appliance from the mains

supply in an emergency. The distance between

the contacts of the emergency switch must be at

least 3 mm.

• Arrange the mains cable in such a way that it

does not get in contact with any hot components

of the appliance. Do not lead it over sharp edges

or corners.

Connection plan

CAUTION:

The protective conductor MUST be connected to ter-

minal PE

NOTE:

L1 + L2

Phase

Connection point 3 and 5 are blind connections!