Table of Contents
Advertisement
storing Numbers
//you da nuf tvfV/i to antBra
uamff,
just press B/S when
the qtiestion f^tAME 7 ap¬
pears. The r^umter wW fhen
be stored without a name.
Memory Prxiteclion
\l you try to ^re a number in a mem-
ofy Iccalion which alraacjy contains a
number, a beep is heard and the
me^pe USED afi^ars in (he dis¬
play tor five seconds.
You can then choose either to:
a. Store the number tn a different
memory location. Erster the num¬
ber of this TtiefTiorv location and
press R/S.
b. Store the number in the setecled
memory location, thus erasing
the oid number (and name). Just
press ft/S.
Memory Full
If; when you attempt to store a new
number, a1( memofy locations are in
USB, STORE L0C7 ied^ayad.
If you do not wish to store the num-
ber^ press C,
If, on Ihe other hand, you do wish lo
store Ihe nunrfber. you can do one of
the loHowIng;
a. Store the number temporartly in
the dialling mwiorv- Press #A
(hash). STORED DMIsdis-
pfayed. See also Ihe chapter
Using the DtaWng Memory.
h> Store the number tn an already
occupied memory location, thus
erasing the old number (end
name). Enter the requir^ mem'
ory iocaUon number end press
B/S-
' Erasing a Stored Number
^ (and Name)
A previously stored phene number
[and name) will be erased autemaU'
catty it you
a new number in the
same memory (oeatbn.
However, you can erase a number
whhoul r^acing it with a new ruim-
ber, by proceeding as follows;
If there is anything showing in the
rhjfneric field of the display, erase
tt with Ihe C key-
2. Press M, foHowed by R/S.
ERASE is displayed,
3. Eriitef the memory location num¬
ber (one. two Of three digits).
4. Pr&ss R/S again. A beep is heard
and USED is displayed.
5. Press R^S again ERASED is dts^
played. Tha number (and name)
(s srased.
Some Hints
Characters
It
^nd #
In addilioni to the digits 0 - 9, the char-
aotens ■» (star) and # (hash) can ba
stored.
This allows you to store sequences for
activating and canceling ceftain ceHu-
lar sevices, such as calf forwarding
(catl dived) and call barring. Refer to
the operating Instructions from your
network operator.
Then you can adivaie or cancel such
'
a service, by racalQng the sequence
from memory and pressing Send.
If a cait is in progress when
you enter a sequence frtdud-
Ing characters * or# you
must haid down f/re ▼ # or
#A fcey urjtff the^ ofSap
pears if} the dtspfay.
30
Advertisement
Table of Contents
