Selecting further settings
Deactivating or activating the Wi-Fi
connection
In Settings mode , use the or
sensor to scroll to the symbol.
Touch OK.
If the Wi-Fi is deactivated, the
symbol will appear in the display.
To reactivate the Wi-Fi connection,
touch OK.
If the Wi-Fi is activated, the symbol
and a dot appear in the upper corner of
the display
.
When the Wi-Fi connection is active,
the symbol appears in the start
display.
Resetting the network configuration
In Settings mode , use the or
sensor to scroll to the symbol.
Touch OK.
Use the sensor to scroll to the
symbol.
Touch OK.
Use the sensor to scroll to the
symbol.
Touch OK.
All entered settings and values for
Miele@home are reset to the default
settings.
The Wi-Fi connection has been
deactivated. will go out in the start
display.
50
Reset the network configuration if
you are disposing of or selling your
refrigeration appliance, or if you are
putting a used refrigeration appliance
into operation. All personal data is
removed from the refrigeration
appliance. This will also ensure that a
previous owner is no longer able to
access the appliance.
Changing the volume of the alarms
and buzzers /
You can change the volume of the
alarms and buzzers (e.g. in the event of
a door alarm or a fault message).
Alternatively, you can switch the alarms
and buzzers off if you find them
annoying.
In Settings mode , use the or
sensor to scroll to the symbol.
Touch OK.
Use the and sensors to select
the volume you want for alarms and
buzzers.
Touch OK.
When the alarms and buzzers are
switched off, will appear.