Adjusting The Volume Of Alarms And Buzzers - Miele KFN 7734 F Operating Instructions Manual

Selecting further settings
Resetting the network configuration
 In Settings mode , use the  or
 sensor control to scroll to the
 symbol.
 Touch OK.
 Use the  sensor control to scroll to
the  symbol.
 Touch OK.
 Use the  sensor control to scroll to
the  symbol.
 Touch OK.
All entered settings and values for
Miele@home are reset to the default
settings.
The WiFi connection has been deactiv-
ated,  goes out in the start display.
Reset the network configuration if
you are disposing of or selling your
refrigeration appliance, or if you are
putting a used refrigeration appliance
into operation. All personal data is
removed from the refrigeration appli-
ance. This will also ensure that a pre-
vious owner is no longer able to ac-
cess the refrigeration appliance.
48
Adjusting the volume of alarms and
buzzers /
You can adjust the volume of alarms
and buzzers (e.g. in the event of a door
alarm or fault message). You can also
switch off the alarms and buzzers if
they disturb you.
 In Settings mode , use the  or
 sensor control to scroll to the
 symbol.
 Touch OK.
 Use the  and  sensor controls to
select the volume you want for
alarms and buzzers.
 Touch OK.
 appears in the display when the
alarms and buzzers are switched off.