First Use; Horizontal Mode; Vertical Mode - Hohem iSteady Mobile+ User Manual

If no mobile phone is detected or the motor is overloaded due to improper
•
phone balance, the Gimbal will shut down after a warning beep.

First Use

Caution:
Smartphones with 6.7-inch or larger screens, such as iPhone 15 Pro Max, should
•
be mounted almost level with the floor.
If your phone case is bulky, we recommend that you remove it before
•
installation.

Horizontal Mode

Pull the phone clamp and mount the phone.
•
Push the phone to the rightmost to get close to the motor.
•
Loosen the knob and slide the arm to balance the Gimbal. Left Small phone e.g.,
•
iPhone 15 (6.1 inches) Right Large phone e.g., iPhone 15 Pro Max (6.7 inches)
Tighten the knob.
•
Long-press the power button to turn on. At least for three seconds.
•

Vertical Mode

Loosen the knob, slide the arm to the leftmost, and tighten the knob.
•
Rotate the phone clamp 90 degrees.
•
Pull the phone clamp and mount the phone. Adjust the phone up or down to
•
roughly balance the Gimbal.
Once the phone is roughly balanced, long-press the power button to turn on. At
•
least for three seconds.
Caution: Do not rotate the phone clamp while the Gimbal is powered on.
Quick Switch to Portrait Mode: After switching to portrait mode, the joystick only
controls the phone to rotate left and right.
The following scenarios do not support quick switching:
In POV mode
•
When the handle is perpendicular
•
Scan the QR code to watch the tutorials.
6