C9300-Nm-4G Module; C9300-Nm-4M Module - Cisco Catalyst 9300X Hardware Installation Manual

Installing a Network Module
Interface
TenGigabitEthernet1/1/4
TenGigabitEthernet1/1/5
TenGigabitEthernet1/1/6
TenGigabitEthernet1/1/7
TenGigabitEthernet1/1/8

C9300-NM-4G Module

All ports in the C9300-NM-4G module are natively GigabitEthernet and are configured GigabitEthernet1/1/1
though GigabitEthernet1/1/4. There are only four interfaces that are valid, and the other four should not be
used even though they are available in the CLI.
Table 24: C9300-NM-4G Module
Interface
GigabitEthernet1/1/1
GigabitEthernet1/1/2
GigabitEthernet1/1/3
GigabitEthernet1/1/4
TenGigabitEthernet1/1/1
TenGigabitEthernet1/1/2
TenGigabitEthernet1/1/3
TenGigabitEthernet1/1/4

C9300-NM-4M Module

Table 25: C9300-NM-4M Module with 4 Multigigabit Ethernet (mGig) Module
Interface
TenGigabitEthernet1/1/1
TenGigabitEthernet1/1/2
TenGigabitEthernet1/1/3
TenGigabitEthernet1/1/4
Action
Disregard
Disregard
Disregard
Disregard
Disregard
Action
Configure this interface
Configure this interface
Configure this interface
Configure this interface
Disregard
Disregard
Disregard
Disregard
Action
Configure this interface
Configure this interface
Configure this interface
Configure this interface
Cisco Catalyst 9300 Series Switches Hardware Installation Guide
C9300-NM-4G Module
73