Configuration - Detecto VET75 Owner's Manual

The VET75 Digital Veterinary Scale has been pre-configured at the factory and should not
require changes to use in most applications. If the factory settings do not meet the
requirements of your application, the following describes the steps to change the configuration
of the scale.
To Begin Configuration:
1. Press the TARE/ON/OFF key to turn the scale on.
2. Press and hold the Kg / Lb key for (3) seconds until the display changes to
3. Release the Kg / Lb key.
4. The display will change to
(Automatic Shut-Off)
1. With the display showing
2. The display will change to show
3. Press the MEMORY key to begin the selection of the automatic shut-off time (in
seconds).
4. The display will change to show the current setting.
5. Press the Kg / Lb key to toggle through the selections,
, ,
6. When the desired time is displayed, press the MEMORY key.
7. The display will change to show
8. Proceed to
(Buzzer/Beeper)
1. With the display showing
2. The display will change to show
3. Press the MEMORY key to show the buzzer/beeper status.
4. Press the Kg / Lb key to toggle between:
Enabled: The display will change to
Disabled: The display will change to
5. Press the MEMORY key.
6. Press the Kg / Lb key.
7. The display will change to show
8. Proceed to
Press the Kg / Lb key to return to the beginning of Configuration or press the MEMORY
key to exit Configuration and return to normal scale operation.
6

CONFIGURATION

(Automatic Shutoff).
, press the Kg / Lb key.
, , or .
(Buzzer/Beeper).
, press the Kg / Lb key.
(End of Configuration).
8535-0250-0M VET75 Owner's Manual
.
.
.
.
.
.
.