Sony SRS-XB23 Manual page 54

Help Guide
Wireless Speaker
SRS-XB13
How to care for the speaker
You can use the speaker more comfortably and for a longer period of time by following the maintenance procedure
below.
If the surface of the speaker gets dirty in the following cases, wash the speaker with fresh water (tap water, etc.)
promptly to remove the dirt. Leaving dirt on its surface may cause the surface to discolor or deteriorate, or the
speaker to malfunction.
Ex.
When the speaker has sand, salt (chlorine), or other residue on it after having been used in a mountain area, by a
swimming pool, etc.
When the speaker is stained with foreign substances (sunscreen, suntan oil, etc.)
If the speaker gets wet, wipe off the moisture using a dry soft cloth immediately. In addition, dry the speaker in an airy
place until no moisture remains.
The sound quality may change if water enters the speaker component of the speaker. This, however, does not
indicate a malfunction. Wipe the moisture off the speaker surface, and leave the speaker on a dry soft cloth with its
surface with the speaker component facing down to let the water out from inside the speaker. Then, dry the speaker
in an airy place until no moisture remains.
Note
If the surface of the speaker gets dirty, do not use detergent, thinner, benzine, alcohol, etc. to clean the speaker because it will
affect the water repellent function of the speaker.
Especially in cold regions, be sure to wipe off the moisture after using the speaker. Leaving moisture on its surface may cause
the speaker to freeze and malfunction.
5-025-468-11(1) Copyright 2021 Sony Corporation
51