Sony SRS-XB23 Manual page 29

After you pair the speaker with a BLUETOOTH device for the first time since purchase or initialize the speaker (the
speaker has no pairing information), the speaker automatically enters pairing mode when it is turned on. Proceed to
step .
When the indicator is flashing slowly
The speaker is searching for BLUETOOTH connections.
To pair the speaker with a second or subsequent BLUETOOTH device (when the speaker has pairing
information of other BLUETOOTH devices), proceed to step
To reconnect the speaker with one of the BLUETOOTH devices that have been paired with the speaker before,
proceed to step
Depending on the BLUETOOTH device, the speaker may be reconnected with the device right after it is turned
on. For details, refer to the operating instructions supplied with your BLUETOOTH device.
When the indicator stays lit
The speaker is already connected with one of the BLUETOOTH devices.
To connect the speaker with another BLUETOOTH device, do either of the following:
To pair the speaker with a second or subsequent BLUETOOTH device (when the speaker has pairing
information of other BLUETOOTH devices), proceed to step
To reconnect the speaker with one of the BLUETOOTH devices that have been paired with the speaker before,
proceed to step
Press the (BLUETOOTH) button.
3
You hear a beep from the speaker and the (BLUETOOTH) indicator starts double flashing (pairing mode).
Search for the speaker on the computer.
4
1.
Click [ (System Preferences)] - [Bluetooth] in the taskbar on the right-bottom of the screen.
.
.
.
.
26