Sony SRS-XB23 Manual page 41

Hide thumbs Also See for SRS-XB23:

Table of Contents

If no ring tone is heard via the speaker

The speaker may not be connected with a BLUETOOTH mobile phone with HFP or HSP. Check the connection

status on the BLUETOOTH mobile phone.

While the phone is ringing or a phone conversation is in progress, adjust the volume by pressing the –/+

(volume) buttons on the speaker or operating the BLUETOOTH mobile phone.

When you press the –/+ (volume) buttons on the speaker or adjust the volume on the BLUETOOTH mobile phone,

the

(power) indicator flashes once or 3 times.

To end a call, press the

If you were listening to music before the call, playback will resume when the call ends. If you end a call by operating

the BLUETOOTH mobile phone, playback will also resume when the call ends if you were listening to music before

the call.

Hint

Some BLUETOOTH mobile phones have handset use priority when receiving a call. In the case of the HFP or HSP connection,

switch the call device to the speaker by operating your BLUETOOTH mobile phone.

If the caller cannot hear or can barely hear your voice, talk more directly into the microphone of the speaker.

The volume of music playback and calling is set independently in the speaker.

Note

When using the Stereo Pair function, the sound of the phone call is output from only the speaker in which the (BLUETOOTH)

indicator lights up in blue.

Depending on the BLUETOOTH mobile phone, playback may not pause when an incoming call arrives.

Use a BLUETOOTH mobile phone at least 50 cm (1.6 ft) away from the speaker. Noise may result if the speaker and the

BLUETOOTH mobile phone are too close.

Depending on the model of your smartphone, the operation system or applications installed, some functions of hands-free calling

may not be used correctly.

Srs-xb13