Advertisement
CUP-3001
The gauge can also be mounted into a Dakota Digital CUP-3001, it will include a mounting block with a long
stainless screw. A bracket for your handle-bar size will also be required. Remove two nuts and U-clamp from the
gauge. Slip the mounting block over the studs and secure it with the two nuts. Once the cup is mounted to the
location of your choosing, and the wires are run through the bottom of the cup you can slide the gauge into the cup
and secure it with the screw through the tip of the cup.
Technical specifications
Minimum operating voltage
Maximum operating voltage
(operating at or near maximum voltage for an extended time can damage unit)
Maximum pressure reading
Gauge Resolution
Low Warning Range
High Warning Range
Typical gauge accuracy
Typical current draw (@ 13.8V) -
DAKOTA DIGITAL offers complete service and repair of its product line. In addition, technical consultation is available
to help you work through any questions or problems you may be having installing one of our products. Please read through the
Troubleshooting Guide. There, you will find the solution to most problems.
Should you ever need to send the unit back for repairs, please call our technical support line, (605) 332-6513, to
request a Return Merchandise Authorization number. Package the product in a good quality box along with plenty of
packing material. Ship the product by UPS or insured Parcel Post. Be sure to include the RMA number on the package, and
include a complete description of the problem with RMA number, your full name and address (street address preferred), and a
telephone number where you can be reached during the day. Any returns for warranty work must include a copy of the dated
sales receipt from your place of purchase. Send no money. We will bill you after repair.
DAKOTA DIGITAL warrants to the ORIGINAL PURCHASER of this product that should it, under normal use and
condition, be proven defective in material or workmanship within 24 MONTHS FROM THE DATE OF PURCHASE, such
defect(s) will be repaired or replaced at Dakota Digital's option.
This warranty does not cover nor extend to damage to the vehicle's systems, and does not cover removal or
reinstallation of the product. This Warranty does not apply to any product or part thereof which in the opinion of the Company
has been damaged through alteration, improper installation, mishandling, misuse, neglect, or accident.
This Warranty is in lieu of all other expressed warranties or liabilities. Any implied warranties, including any implied
warranty of merchantability, shall be limited to the duration of this written warranty. Any action for breach of any warranty
hereunder, including any implied warranty of merchantability, must be brought within a period of 24 months from date of original
purchase. No person or representative is authorized to assume, for Dakota Digital, any liability other than expressed herein in
connection with the sale of this product.
WARNING: This product can expose you to chemicals including lead, which is known to the State of
California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov
-
7 volts DC
-
17 volts DC
-
150 psi
-
1 psi
0 – 144
-
44 – 150
-
4 psi
-
0.1 A
SERVICE AND REPAIR
Dakota Digital 24 Month Warranty
400 psi
73 psi
2 psi
0.5 psi
0 – 374
0 – 72
106 – 394
22 – 75
2 psi
±8psi
29 psi
0.2 psi
0 – 27.6
9.4 – 28.6
1.2 psi
MAN# 650100A
Advertisement
