Product Specifications - SHOWTEC Bat 3 Digital Manual

Product Specification
Model: Showtec Bat 3 Digital
Voltage: 240V-50Hz (CE)
Fuse: 3A / 250V
Dimensions: 530x320x160mm (LxWxH)
Weight: 10,4 kg
Operation and Programming
Signal pin OUT: pin 1 earth, pin 2 (-), pin 3 (+)
Set Up and Addressing: LED control panel
DMX Channels 5
Signal input 3-pin XLR male
Signal output 3-pin XLR female
Lamp
Allowed lamp models*:
Osram ELC 24V 250W ordercode 80809O
GE ELC 24V 250W ordercode 80809G
Philips ELC 24V 250W ordercode 80809P
Control: Automatic and DMX remote ON / OFF
Electro-mechanical effects
Gobos: 15 gobos plus open
All lenses are anti-reflection coated
High luminous-efficiency parabolic system
Dimmer: 0 – 100% linear dimmer
Strobe-effect with variable speed (1 flash -- 8 flashes/sec.)
DMX-control via standard DMX-controller
Sound-controlled via built-in microphone
Wheel control: auto-electronic reset
Gobos
Max. ambient temperature t : 40°C; Max. housing temperature t : 80°C
a B
Cooling: 1 axial fan in the projector
Motor: 5 high quality stepping-motor controlled by microprocessors
Minimum distance:
Minimum distance from flammable surfaces: 0.5m
Minimum distance to lighted object: 0.8m
*: Versions for other lamps may be produced. Please check the specification label on your product.
Design and product specifications are subject to change without prior notice.
16