Screw Chart - Assa Abloy Corbin Russwin PED5200 Series Installation Instructions Manual

PED5200 & PED5200 A Series
Rim Exit Device for 10T, 55T, 42, & 42T Functions
Installation Instructions

Screw Chart

For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2022, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved.
Reproduction in whole or in part without the express written permission of ASSA ABLOY Access
and Egress Hardware Group, Inc. is prohibited.
SCREW
#10-24 X 3/4" FLAT HEAD
MACHINE SCREW
#10 X 1-1/4" FLAT HEAD
WOOD SCREW
#10-24 X 3/4" ROUND HEAD
MACHINE SCREW
#10 X 1-1/4" ROUND HEAD
WOOD SCREW
#10-24 X 3/4" OVAL HEAD
MACHINE SCREW
#10 X 1-1/4" OVAL HEAD
WOOD SCREW
#8-32 X 7/16" FLAT HEAD
MACHINE SCREW
#8-32 X 1/4" SOCKET HEAD
SET SCREW
#8-32 X 5/16" W/ #6 OVAL HEAD
MACHINE SCREW
#8-32 X 5/8" W/ #6 OVAL HEAD
MACHINE SCREW
1/4"-20 X 2-3/8" KNURLED FLAT HEAD
MACHINE SCREW
TOTAL QTY
WHERE USED
SUPPLIED
(4) CHASSIS
4 CORNER MOUNTING HOLES
(METAL DOOR)
(4) CHASSIS
4 CORNER MOUNTING HOLES
(WOOD DOOR)
(2) REAR MOUNTING PLATE
(METAL DOOR)
4
(2) 649 STRIKE
INNER MOUNTING HOLES
(2) REAR MOUNTING PLATE
2
(WOOD DOOR)
(2) 649 STRIKE
2 OUTER MOUNTING HOLES
(METAL FRAME)
(2) 649 STRIKE
2 OUTER MOUNTING HOLES
(WOOD FRAME)
(2) CYLINDER SUPPORT
2 TO CHASSIS
(42 & 42T FUNCTIONS ONLY)
(1) CYLINDER SUPPORT
1 TO CYLINDER
(42 & 42T FUNCTIONS ONLY)
(2) CHASSIS COVER
FRAME SIDE
4
(2) END CAP
(2) CHASSIS COVER
2
RAIL SIDE
(2) EXIT TRIM
2
(IF USED)
2
FM576 9/22