Table of Contents
Advertisement
EH-TW8000/TW9000/TW9000W
Connector
Destination
No.
CN1301
Lens Shutter
CN5301
CN5303
CN5300
CF Motor
CN5302
CF Motor
CN1302
EIF Board
(Backside)
CN101
Rx Wireless HD
(Backside)
(EH-TW9000W only)
CN102
CN3700
SW Board
LV Thermistor
CN3900
(Optical Engine)
CN3901
TH1 Board
CN3902
TH2 Board
CN3903
TH3 Board
CN3905
INT Fan (1)
CN3906
INT Fan (2)
CN3907
EX Fan
CN3908
Lamp Fan
CN3909
PS Fan
SEIKO EPSON
Troubleshooting
Error Information
Code
Name
When pressing the power button, initialization starts normally, then the projection
starts. But 3D glasses does not function.
(Cannot view 3D images.)
---
---
When pressing the power button, initialization starts normally, then the projection
starts. But Lens Shutter does not open.
When pressing the power button, initialization starts normally, then the projection
starts. But gear of Lens shutter does not stop for a few seconds.
Abnormal noises occur while initializing, and the projector changes to the Cinema
Filter Error mode with the Lamp LED and the Temperature LED blinking red.
---
---
When pressing the power button, initialization starts normally, then the projection
starts. But Lens Shutter does not open.
When pressing the power button, initialization starts normally, then the projection
---
---
starts. But an external 3D IR emitter does not function.
When pressing the power button, initialization starts normally, then the projection
---
---
starts. But connecting WirelessHD is failure.
When the AC cable is connected, the power LED does not light blue. The power
---
---
button does not work properly. But, turning on the projector from a remote
controller can be made.
Sensor error occurs while initializing, and LEDs indicate the error, then the
SE
Sensor Error
projector turns into the abnormal stand-by status.
Fan error occurs while initializing and LEDs indicate the error, then the projector
FN
Fan Error
turns into the abnormal stand-by status.
Status
53
CONFIDENTIAL
Reference
" Troubleshooting on 3D
Image/ WirelessHD
(p44)"
" Troubleshooting on 3D
Image/ WirelessHD
(p44)"
•
" Troubleshooting at
Power-ON (p42)"
•
" Troubleshooting on
Operation Abnormality
(p46)"
" Troubleshooting from
the Error Code on
Cooling System Errors
(p39)"
Revision A
Advertisement
Table of Contents
Troubleshooting
