Table of Contents
Advertisement
Auto Exposure Bracketing (AEB)
"2.1.©.1.2*
Correct exposure
"2.1.®. 1.2*
Underexposure
"2.1.®. 1.2*
Overexposure
Take the pictures.
• The bracketed pictures will be taken
in the current film advance mode.
• The respective AEB amount is
displayed on the LCD panel and in the
viewfinder for each bracketed shot.
• After the three AEB shots are taken,
the AEB will not be canceled
automatically. To cancel AEB, set the
AEB amount back to " 0.0",
W AEB cannot be used with flash or bulb exposures.
SI • in the continuous shooting mode, holding down the shutter button will take all
three bracketed shots continuously. However, the viewfinder will not display the
respective AEB information.
• If the self-timer or remote control is used, the three AEB shots will be taken in
continuous succession automatically.
• If C.Fn-5-1 is set (mirror lockup), single-frame film advance will take effect
during AEB shooting even if the continuous film advance mode has been set.
• AEB can be used in combination with exposure compensation. If the AEB +
exposure compensation range you set exceeds the displayable range, it will be
displayed as shown below.
In the <
P >, < Tv
>. <
Av
>, and < DEP > modes:
'2.1.<0.1.2*
:±1
Stop
AEB.
■2.1.0.1.2*
: ±1 stop AEB with -1-stop exposure compensation.
-2.1 .'0.1.2*
: ±1 stop AEB with -1,5-stop exposure compensation.
-2.1.0.1.2*
: ±1 stop AEB with -2-stop exposure compensation.
In the < M > mode:
-2.1.0.1.2*
: ±1 stop AEB with -2-stop exposure compensation.
-2.1 .>9.1.2*
: ±1 stop AEB with over -2-stop exposure compensation.
r
2
.1.(9.
1
.
2
*
66
Advertisement
Table of Contents
