Putting Dos On The Fixed Disk - IBM AT/370 Manual To Operations

Putting DOS on the Fixed Disk
The information presented here allows you to put DOS
on your fixed disk without reading through the detailed
information presented in the IBM DOS (Disk Operating
System) manual.
The following steps instruct you to partition, format
and transfer, and copy DOS files onto your C fixed
disk.
If
you have difficulty or need more information, refer to
the IBM DOS (Disk Operating System) manual:
• For basics on DOS operation, go to Section 1,
"Chapter 2. Getting DOS Started."
• For information about putting DOS on your fixed
disk, go to Section 1, "Chapter 4. Preparing Your
Fixed Disk."
Proceed with "Partitioning Your Fixed Disk" on page
3-9.
3-8 AT/370
System
Setup