Advertisement
Quick Links
SUMAKE
Pressure Spray Gun With 2L Alum. Cup
Specification:
Free Type
Standard Nozzle
Capacity Of Cup
Air Consumption
Air Inlet (NPS)
Air Hose (NPS)
Air Pressure
Net Weight
SUMAKE INDUSTRIAL CO., LTD
4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91
PNEUMATIC TOOLS
SS-1305HSPA-R
Pressure
1.0 mm
2 L
6.2 CFM (175 L/min)
1/4" (6.35 mm)
3/8" (10 mm)
29psi (2kg/cm²) (2Bar)
5.94 lbs (2.7 kg)
Noise and Vibration:
Vibration
Sound Pressure Level
0.116 m/s²
Sound power level
Uncertainty
²
K= 1.5 m/s
Noise
Remark
Please always
: 81.6 dB(A)
wear ear
protector at
environment
noise level > 80
: 92.6 dB(A)
dB(A) due to
risk of impaired
Uncertainty
hearing!
K= 3dB
SS-1305HSPA-R-S-1606A-GW
Advertisement
Related Manuals for Sumake SS-1305HSPA-R
Summary of Contents for Sumake SS-1305HSPA-R
- Page 1 3/8” (10 mm) dB(A) due to risk of impaired Air Pressure 29psi (2kg/cm²) (2Bar) Uncertainty Uncertainty hearing! ² K= 1.5 m/s K= 3dB Net Weight 5.94 lbs (2.7 kg) SUMAKE INDUSTRIAL CO., LTD 4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91 SS-1305HSPA-R-S-1606A-GW...
-
Page 2: Ec Declaration Of Conformity
DECLARATION OF CONFORMITY SUMAKE INDUSTRIAL CO., LTD. 4F, No. 351, Yangguang St., Neihu District, Taipei City, Taiwan declare in sole responsibility that the equipment Equipment： PRESSURE SPRAY GUN WITH 2L Alum. Cup Model/ Serial No.： SS-1305HSPA-R to which this declaration applies, complies with these normative documents: Machinery Directive: 2006/42/EC ... - Page 3 Application: SUMAKE spray guns for spraying various paints are used in a wide range of applications and processes. Designed for superior finish performance, reduce overspray, ergonomic comfort and increase productivity. Placing the tool in service: Always use clean, dry air at recommend air pressure at the inlet. Higher pressure may result in hazardous situations.
- Page 4 Atomization air pressure is too high Reduce air pressure Material is not enough or thin Increase material viscosity Spray crescent pattern Fluid nozzle is dirty or damaged Clean or replace fluid nozzle Material is blocked on the air cap Clean or replace air cap SS-1305HSPA-R-I-1606A-GW...
- Page 5 SS-1305HSP HVLP SUCTION TYPE AIR SPRAY GUN PARTS LIST Parts No. Description Q'ty Parts No. Description Q'ty 1305-01 Air Cap 1305-13-1 O-Ring 1305-02A 1305-14 Air Valve Spring Fluid Nozzle 1.0 [SS-1305HSPB) 1305-02B Fluid Nozzle 1.3 1305-15 Fluid Adj. Guie Set 1305-02C Fluid Nozzle 1.4 1305-16A...
- Page 6 Fluid Outlet SS1305HSPA-08 Fluid tube (2Qt.) SS1305HSPA-10A Container Cover [SS-1305HSPA-R] SS1305HSPA-11A Handle [SS-1305HSPA-R] 60psi Regulator (In) & 100psi Regulator (Out) SS1305HSPA-12A [SS-1305HSPA-R] SS1305HSPA-13 Relief Valve Stem [SS-1305HSPA-R] SS1305HSPA-14 Valve [SS-1305HSPA-R] SS1305HSPA-15 Spring [SS-1305HSPA-R] SS1305HSPA-16 Bracket [SS-1305HSPA-R] SS1305HSPA-17 Screw [SS-1305HSPA-R] SS-1305HSPA-R-P-1606A-GW...
-
Page 7: Spray Gun
SPRAY GUN Original instructions SUMAKE Industrial Co. Ltd. - Page 8 The tool has been manufactured in conformity with the instruction of EU machine directive. The EU mark will be considered void in the event of inexpert repairs, the use of non-original parts and in case of non-observance of the safety instructions in the user’s manual. Possible direct or indirect consequential damages are not the responsibility of SUMAKE Industrial co., Ltd. General safety rules: Watch the tool at all times when in use.
- Page 9 Safety precautions for repetitive motions hazards 1. When using the tool, the operator may experience discomfort in the hands, arms, shoulders, neck, or other parts of the body. 2. While using the tool, the operator should adopt a comfortable posture. Maintain secure footing and avoid awkward or off-balanced postures.
- Page 10 General preparation and connection: Before connecting the air hose, apply 4 to 5 drops of SAE#10-20 spindle oil at the air inlet. Also, every 3 to 4 hours of operation, oiling is necessary. Twist Teflon thread tape to ensure a proper seal air inlet. Then tighten the air coupler into air tool. The supplied compressed air must be clean and dry, with the appropriate oil mist.
Need help?
Do you have a question about the SS-1305HSPA-R and is the answer not in the manual?
Questions and answers