Table of Contents
Advertisement
Quick Links
SUMAKE
LVLP Gravity Type Air Spray Gun
Specification:
Free Type
Nozzle
Capacity Of Cup
Air Consumption
Air Inlet (NPS)
Air Hose (NPS)
Air Pressure
Net Weight
SUMAKE INDUSTRIAL CO., LTD
4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91
PNEUMATIC TOOLS
W/600cc Alu. Cup
SS-1303LG
Gravity
1.3mm, 1.4mm, 1.5mm, 1.6mm,
1.7mm, 1.8mm, 1.9mm, 2.0mm,
2.2mm, 2.5mm
0.6 L
3 CFM (85 L/min)
1/4" (6.35 mm)
3/8" (10 mm)
60psi (4.2kg/cm²) (2Bar)
1.54 lbs (0.7 kg)
Noise and Vibration:
Vibration
Sound Pressure Level
0.4 m/s²
Sound power level
Uncertainty
²
K= 1.5 m/s
Noise
Remark
Please always
: 70 dB(A)
wear ear
protector at
environment
: 81 dB(A)
noise level > 80
dB(A) due to
risk of impaired
Uncertainty
hearing!
K= 3dB
SS-1303LG-S-1406B-GWF
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Sumake SS-1303LG
Summary of Contents for Sumake SS-1303LG
- Page 1 Air Hose (NPS) 3/8” (10 mm) risk of impaired Uncertainty Uncertainty hearing! Air Pressure 60psi (4.2kg/cm²) (2Bar) ² K= 1.5 m/s K= 3dB Net Weight 1.54 lbs (0.7 kg) SUMAKE INDUSTRIAL CO., LTD 4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91 SS-1303LG-S-1406B-GWF...
-
Page 2: Ec Declaration Of Conformity
DECLARATION OF CONFORMITY SUMAKE INDUSTRIAL CO., LTD. 4F, No. 351, Yangguang St., Neihu District, Taipei City, Taiwan declare in sole responsibility that the equipment Equipment： LVLP GRAVITY TYPE AIR SPRAY GUN W/600CC ALU. CUP Model/ Serial No.： SS-1303LG to which this declaration applies, complies with these normative documents: Machinery Directive: 2006/42/EC ... -
Page 3: Troubleshooting
INSTRUCTION MANUAL wear goggles and gloves when spraying or cleaning. There are no vibrations to be transmitted to the operator when using the spray gun. lower back stroke. Prior to operation read the operating instructions carefully. SAFETY LVLP(HLVP) [Lower (High) Volume Low Pressure] spraying equipment has been developed as an Never allow untrained or unauthorized persons to operate this spray gun. -
Page 4: Parts List
HVLP GRAVITY TYPE AIR SPRAY GUN W/600CC ALU. CUP PARTS LIST Parts No. Description Q'ty Parts No. Description Q'ty 1303-01A Air Cap [SS-1303LG] 1303-12F Paint Needle 1.8 [SS-1303W/LG] 1303-01B Air Cap [SS-1303HG] 1303-12G Paint Needle 1.9 [SS-1303W/LG] 1303-02A Fluid Nozzle 1.3 [SS-1303W/LG] 1303-12H Paint Needle 2.0 [SS-1303W/LG]... -
Page 5: Spray Gun
SPRAY GUN Original instructions SUMAKE Industrial Co. Ltd. -
Page 6: General Safety Rules
The tool has been manufactured in conformity with the instruction of EU machine directive. The EU mark will be considered void in the event of inexpert repairs, the use of non-original parts and in case of non-observance of the safety instructions in the user’s manual. Possible direct or indirect consequential damages are not the responsibility of SUMAKE Industrial co., Ltd. General safety rules: Watch the tool at all times when in use. - Page 7 Safety precautions for repetitive motions hazards 1. When using the tool, the operator may experience discomfort in the hands, arms, shoulders, neck, or other parts of the body. 2. While using the tool, the operator should adopt a comfortable posture. Maintain secure footing and avoid awkward or off-balanced postures.
-
Page 8: Risk Of Injury
General preparation and connection: Before connecting the air hose, apply 4 to 5 drops of SAE#10-20 spindle oil at the air inlet. Also, every 3 to 4 hours of operation, oiling is necessary. Twist Teflon thread tape to ensure a proper seal air inlet. Then tighten the air coupler into air tool. The supplied compressed air must be clean and dry, with the appropriate oil mist.
Need help?
Do you have a question about the SS-1303LG and is the answer not in the manual?
Questions and answers