Advertisement
Quick Links
SUMAKE
Suction Type High Pressure Air Spray Gun
Specification:
Free Type
Standard Nozzle
Optional Nozzle
Capacity Of Cup
Air Consumption
Air Inlet (NPS)
Air Hose (NPS)
Air Pressure
Net Weight
SUMAKE INDUSTRIAL CO., LTD
4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91
PNEUMATIC TOOLS
Suction
1.8 mm
1.5, 2.0 & 2.5mm
1 L
11.7 CFM (331 L/min)
1/4" (6.35 mm)
3/8" (10 mm)
60 psi (4.2 kg/cm²) (4.2Bar)
2.53 lbs (1.15 kg)
SS-1231
Noise and Vibration:
Vibration
0.2 m/s²
Uncertainty
K= 1.5 m/s
Noise
Sound Pressure Level
: 86 dB(A)
Sound power level
: 97 dB(A)
Uncertainty
²
K= 3dB
SS-1231-S-1805B-GWF
Remark
Please always
wear ear
protector at
environment
noise level > 80
dB(A) due to
risk of impaired
hearing!
Advertisement
Related Manuals for Sumake SS-1231
Summary of Contents for Sumake SS-1231
- Page 1 Air Hose (NPS) 3/8” (10 mm) risk of impaired Air Pressure 60 psi (4.2 kg/cm²) (4.2Bar) Uncertainty Uncertainty hearing! ² K= 1.5 m/s K= 3dB Net Weight 2.53 lbs (1.15 kg) SUMAKE INDUSTRIAL CO., LTD 4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91 SS-1231-S-1805B-GWF...
-
Page 9: Parts List
SS-1231(A) SUCTION TYPE HIGH PRESSURE AIR SPARY GUN PARTS LIST Part No. Description Q'ty Part No. Description Q'ty 1231-01 Air Cap 1231-15 Fluid Adj. Guide Set 1231-02C Fluid Nozzle 1.5 1231-16C Fluid Needle 1.5 1231-02D Fluid Nozzle 1.8 1231-16D Fluid Needle 1.8 1231-02E Fluid Nozzle 2.0... -
Page 10: Ec Declaration Of Conformity
DECLARATION OF CONFORMITY SUMAKE INDUSTRIAL CO., LTD. 4F, No. 351, Yangguang St., Neihu District, Taipei City, Taiwan declare in sole responsibility that the equipment Equipment： SUCTION TYPE HIGH PRESSURE AIR SPRAY GUN Model/ Serial No.： SS-1231 to which this declaration applies, complies with these normative documents: Machinery Directive: 2006/42/EC ... -
Page 11: Spray Gun
SPRAY GUN Original instructions SUMAKE Industrial Co. Ltd. - Page 12 The tool has been manufactured in conformity with the instruction of EU machine directive. The EU mark will be considered void in the event of inexpert repairs, the use of non-original parts and in case of non-observance of the safety instructions in the user’s manual. Possible direct or indirect consequential damages are not the responsibility of SUMAKE Industrial co., Ltd. General safety rules: Watch the tool at all times when in use.
- Page 13 Safety precautions for repetitive motions hazards 1. When using the tool, the operator may experience discomfort in the hands, arms, shoulders, neck, or other parts of the body. 2. While using the tool, the operator should adopt a comfortable posture. Maintain secure footing and avoid awkward or off-balanced postures.
- Page 14 General preparation and connection: Before connecting the air hose, apply 4 to 5 drops of SAE#10-20 spindle oil at the air inlet. Also, every 3 to 4 hours of operation, oiling is necessary. Twist Teflon thread tape to ensure a proper seal air inlet. Then tighten the air coupler into air tool. The supplied compressed air must be clean and dry, with the appropriate oil mist.
Need help?
Do you have a question about the SS-1231 and is the answer not in the manual?
Questions and answers