Assembling And Operating The Appliance - Silvercrest 281312 Operating Instructions Manual

Assembling and operating the appliance

■ Before using the appliance for the first time, clean all component parts
thoroughly as described in the section "Cleaning and care".
■ Select a safe and secure positioning for the juicer. For optimal handling we
recommend that the appliance is positioned with the power cable
from the rear of the appliance to the wall socket. All operating elements can
now be directly and easily handled:
–
–
–
WARNING! RISK OF INJURY!
► Ensure that the appliance is switched off and the plug
wall socket before assembling the appliance.
1) Place the juice tank
and the juice outlet
2) Place the filter
clicks into place. Ensure that it is firmly seated before continuing with the
assembly.
3) Slide the container for fruit and vegetable pulp
outlet (see fold-out page).
4) Place the lid
above the blades of the filter
5) Ensure that the lid
Lift the clamps
6) Press the lower part of the clamps
into place.
7) Push the froth skimmer into the juice collector
separate juice collector
protrudes into the separate juice collector
8) Insert the plug
SFE 450 C1
the On/Off switch
the container for fruit and vegetable pulp
the juice outlet on the right.
on the appliance base
grip into in the recesses.
on the drive shaft
onto the juice tank
is sitting firmly in the recess on the juice tank
and clip them into the notches on the lid
into a mains power socket.
at the front,
and press it down so that it audibly
, so that the feed tube
.
against the appliance until they click
next to the appliance so that the juice outlet
.
running
on the left,
removed from the
, so that the three catches
from below under the
is sitting
.
.
and put the lid on. Place the
GB
│ 27 ■