Table of Contents
Advertisement
Introduction
Thank you very much for purchasing our products. To maximize the functionality of this product, please read this
guide carefully and follow the instructions for proper handling.
About this Guide
This guide describes how to handle and use this product properly.
Keep this guide at hand for your future reference.
Text Conventions
The following conventions are used throughout this guide. For safety symbols, see "Safety Indications" provided
earlier.
IMPORTANT:
NOTE:
1. General Description
1.1. Overview
The N8104 Adapter is an Ethernet® LAN Adapter for Express server 5800 series.
This product has two or four RJ-45 interfaces with 10/100/1000Mbps speed. And you can connect to the network
1Gbps(maximum) per port.
IMPORTATANT:
NOTE:
1.2. Description
The functions of each part are as follows.
-
LAN Port
A connector provides to access a network. For the types of connectable cables and how to connect, see
"Network Cables".
-
Bracket/Screw
This product has 2 type of bracket. By default, Full-height type is attached. If need to mount on Low-profile
PCI-EXPRESS slot, you can change to another bracket. See "Bracket Replacement".
-
PCI-Express® Connector
This product conformed to PCI EXPRESS 2.0. The logical lane size and card edge size is listed as follows,
Model
N8104-178
N8104-179
N8104-180
N8104-181
Items that are mandatory or require attention when using this product
Helpful and convenient piece of information
-
Do not install this product to a computer that is not recommended by NEC
Corporation.
Check the PCI-Express® slot which can be attached with reference to User's Guide
of Express Server before attaching this product.
Standard
PCI Express 2.0
PCI Express 2.0
PCI Express 2.0
PCI Express 2.0
Card Edge
size
x1
x4
x4
x4
E-8
Logical Lane
size
x1
x4
x4
x4
Advertisement
Table of Contents
