Table of Contents
Advertisement
Available languages
Available languages
– SPORT/eMTB:
SPORT: Powerful assistance, for mountain biking and
cycling in urban traffic
eMTB: Optimum assistance whatever the terrain, rapid
acceleration when starting from a standstill, improved dy-
namics and top performance (eMTB only available in
combination with the drive units BDU250P CX, BDU365,
BDU450 CX and BDU480 CX. A software update may be
required.)
– TURBO: Maximum assistance even at high pedalling
speeds, for sport cycling
To increase the assistance level, press the + (12) button on
the operating unit repeatedly until the desired assistance
level appears on the display. To decrease the assistance
level, press the – (11) button.
The requested motor output appears on the display h (see
"Start page", page English – 7). The maximum motor out-
put depends on the selected assistance level.
If the on-board computer is removed from the holder (5),
the assistance level that was last displayed is saved.
Switching the push assistance on/off
The push assistance aids you when pushing your eBike. The
speed in this function depends on the selected gear and can
reach a maximum of 6 km/h. The lower the selected gear,
the lower the speed of the push assistance function (at full
power).
The push assistance function must only be used when
u
pushing the eBike. There is a risk of injury if the wheels
of the eBike are not in contact with the ground while using
the push assistance.
To activate the push assistance, briefly press the WALK
button on your on-board computer. After activation, press
the + button within 3 s and keep it pressed. The eBike drive
is switched on.
Note: The push assistance cannot be activated at assistance
level OFF.
The push assistance is switched off as soon as one of the
following occurs:
– You release the + button;
– The wheels of the eBike are locked (e.g. by applying the
brakes or hitting an obstacle);
– The speed exceeds 6 km/h.
The push assistance function is subject to local regulations;
the way it works may therefore differ from the description
above, or the function may even be deactivated completely.
Switching bicycle lights on/off
On the model on which the lighting is powered by the eBike
system, the front and rear lights can be switched on and off
at the same time via the on-board computer using the bike
light button (3).
Check that your bike lights are working correctly before
every use.
With the light switched on, the lighting c indicator (see "Start
page", page English – 7) appears in the status bar on the
display.
Bosch eBike Systems
Switching the bike lights on and off has no effect on the
backlighting of the display.
Creating a user ID
To be able to use all functions of the on-board computer, you
must register online.
With a user ID, you can analyse your ride data, plan offline
routes and transfer these routes to the on-board computer.
You can set up a user ID via your Bosch eBike Connect
smartphone app or simply at www.ebike-connect.com.
Enter the details required for registration. The Bosch eBike
Connect smartphone app is available to download free of
charge from the App Store (for Apple iPhones) or from the
Google Play Store (for Android devices).
Connecting to the On-Board Computer using the
Bosch eBike Connect App
Follow these steps to establish a connection to your smart-
phone:
– Load the app.
– Select the tab <My eBike>.
– Select <Add new eBike device>.
– Add Kiox.
The app will then display an instruction to press and hold the
bike lighting button (3) on the on-board computer for
5 seconds.
Press and hold the button (3) for at least 5 seconds. The on-
board computer automatically activates the Bluetooth® Low
Energy connection and switches to pairing mode.
Follow the instructions on the screen. Once pairing is com-
plete, the user data is synchronised.
Note: The Bluetooth® connection does not have to be activ-
ated manually.
Activity tracking
In order to record activities, you must be registered with and
logged into the eBike Connect portal or the eBike Connect
app.
To record activities, you must consent to the storage of your
location data in the portal and/or in the app. Without this,
your activities will not be shown in the portal or the app. The
position is recorded only if you are registered as a user on
the on-board computer.
eShift (optional)
eShift is the integration of electronic gear-shifting systems
into the eBike system. The eShift components are electric-
ally connected to the drive unit by the manufacturer. The
separate operating instructions describe how to operate the
electronic gear-shifting systems.
eSuspension (optional)
eSuspension is the integration of electronic shock absorp-
tion and suspension elements into the eBike system. You
can use the Quick Menu to select predefined settings for the
eSuspension system.
Page 49
English – 5
1 270 020 XBK | (19.03.2021)
Advertisement
Table of Contents
