Advertisement
Available languages
Available languages
ENGLISH
CONNECTIONS
SPEAKER
SYSTEM (A)
TURNTABLE
{FOR
MC, MM}
These specifications are for the European model.
Speaker impedance
AC
OUTLET
@
When the A and B terminal sets are to be used
separately,
the
speakers
that
are to be con-
nected
should
have an impedance
of 6 to 16
ohms.
LINE
OUT
(PB)
LINE
IN (REC)
LINE
OUT
(PB)
LINE
'N (REC)
When
the two terminal sets (A + B) are to be
used at the same
time, use of speakers whose
impedance
is outside
the range from 12 to 16
ohms will result in malfunction. Be careful not
to let this happen.
=] Eale=\e)
EE
— Fe
Loum
Be
VIDEO DECK 2 (Sound out)
TAPE DECK 1
TAPE DECK 2
oO
a
9°
°
Connection to the Speaker System
Connect the speaker system for the left channel (the left side as viewed facing the front) to the L speaker
terminal on the back panel, and the speaker system for the right channel to the R terminal.
@ When
connecting the speaker terminals to the speaker systems, make certain to connect the polarities
correctly (+ to + and ~ to —).
@ During connection, be careful that the inner wires in the speaker cords do not protrude from the termi-
nals to contact any other terminal, and that the inner wires in the separate speaker cords do not contact
each other.
RIGHT SPEAKER
Lerner
Connecting the speaker Cords
az
Ae B 5 ~16 chm/SPEAKER
A +B 12~16
obm/ SPEAKER
Lift the lock piece on the termi-
nal
to
its upright
position
and
insert
the cord.
Then
reset the
tock,
Advertisement
