Beko HII64720QUF2T User Manual page 21

3- Cooker-Hood connection setting (
ü Using this function, you may connect
cooker and hood to allow them to oper-
ate together automatically.
1. Turn on the cooker by touching the
key, and turn it off by touching
again.
2. Within 10 seconds after turning off the
product, touch
ð Default setting
played on the timer screen.
3. Touch twice on
Hood connection setting.
Hood operation level Lamp
0 off
1 light
2 light
3 light
4 light
5 light
6 light
7 light
Setting hood operation level over the
cooker
ü With this setting, you may set hood op-
eration level over the cooker.
1. Turn the cooker on by touching the
key.
2. Touch the key for 3 seconds.
ð The light of the
off.
3. Touch the key until the desired oper-
ation level for the hood is reached.
Using induction hobs safely and effectively
Operating principle: Induction heater
heats the cooking pot directly due to its op-
erating principle. Thus, it has many advant-
ages over other cooker types. It operates
more efficiently and the hob surface is
cooler.
key
/ / / keys.
will be dis-
key for the cooker-
Hood (Boiling on one
hob)
off
off
off
L1
L1
L1
L1
L2
key will go
ð On the timer display,
)
and "0" appears on the left rear
hob zone display.
4. By tapping on the setting area of the left
rear hob setting area or by sliding your
finger on the area, set the hood opera-
tion level (see Table - Hood operation
level) set between "0" and "7".
5. By touching the
cooker-hood connection setting.
ð Your cooker will turn off and will start
to operate with the selected cooker op-
eration level.
Table - Hood operation level
Hood (Boiling on any
2 or more hobs)
off
off
L1
L1
L1
L2
L2
L2
Your induction cooker is equipped with su-
perior safety system that shall ensure oper-
ation with maximum safety.
Your cooker may be equipped with
hobs with a diameter of 145, 180,
210 and 280 mm with induction
feature depending on the model.
Thanks to the induction feature,
each hob zone automatically de-
tects the pot placed on it. Energy
occurs on the contact area of the
pot only, and thus minimum level of
power is consumed.
Automatic turning off system
The cooker control has an automatic turn
off system. If one or more hob zone(s) are
left on, the hob zone turns off automatically
after a while (See Table-1). In case of a
timer assigned to the hob zone, the timer
screen is turned off then, too.
EN / 21
appears,
key, confirm the
Frying
off
off
L1
L1
L2
L2
L3
L3
EN
CS