Western Digital My Book WDBAAJ0010HSL User Manual page 22

4. Read the license agreement and click Accept to continue.
The WD SmartWare Virtual CD Manager utility locates your drives and asks you to
select the one you want to configure:
5. Select your My Book drive, and the WD SmartWare Virtual CD Manager utility
displays its current and target VCD settings:
6. Click Configure Drive to continue.
7. As prompted, for your change to take effect, you must power cycle your My Book
drive:
a. Disconnect the USB or FireWire cable from your drive.
b. Disconnect the AC power adapter cable from your drive.
c. Wait ten seconds.
d. Reconnect the AC power adapter cable to your drive.
e. Reconnect the USB or FireWire cable to your drive.
8. Click Exit to close the WD SmartWare Virtual CD Manager utility.
9. Check your desktop display to confirm the change.
MY BOOK STUDIO AND STUDIO LX
CONNECTING THE DRIVE AND GETTING STARTED – 17
USER MANUAL