Operation
Turn On/Off Procedure
A Power on
Press the Standby/On key to turn on the lamp. Th@ LfiDh*® fehk green during warm up and then light
solid green.
> "INPUT SIGNAL DETECTED, ACTIVATING AUTO IMAGE" will be displayed on the screen afterthe
projector has identified the input signal;
> "SEARCHING" message will be displayed on the screen if there is no signal input;
> ;'SYNC IS OUT OF RANGE" message will be displayed on the screen if the horizontal frequency of the
B Standby
Press the Standby/On key for more than one second to turn off the lamp. The LED will then blink
orange and the lamp will shut down, but the fen will continue to run for about I minute to cool the
lamp. After the fen stops the LED will'turn to a light solid orange
External Control
A Control Pad