Viewing Recordings; Erasing All Recordings - AEMC 6418 User Manual

NOTE:
To record a measurement, the batteries must not be
discharged (the

3.7.2 Viewing Recordings

Set the switch
to MR.
Use ▲ and ▼ to scroll through all of the recorded measurements.

3.7.3 Erasing All Recordings

Clamp-On Ground Resistance Tester Model 6418 - User Manual
symbol must not be displayed).
The instrument displays the last measurement recorded.
PRESS ► to display the date and time.
Set the switch to SET-UP.,
then follow the procedure
described in § 3.4 in the
CLR menu.
When you return to the
MR setting, the instrument
indicates that the memory
is empty.
The measurement is recorded in the
memory slot of which the number
is displayed (in this example, slot
number 2).
It is recorded with all accompanying
information:
ƒ date and time
ƒ any alarms and their status
(triggered or not)
ƒ any errors (NOISE, OR, LOOP)
ƒ ancillary displays (HOLD, )
19