Watches With Alarm - Wenger 70100 Instruction Booklet

WaTChes WITh alarm

1. Begin by setting the regular time by following
the instructions on pages 6ff.
2. Pull crown out to Position 2.
3. Rotate crown clockwise to set alarm hand (indi-
cated in red) at desired alarm time.
4. Pull out alarm button (located at either 2 o'clock or 11 o'clock) to set
alarm. You will hear a brief signal acknowledging that the alarm is set.
5. Return crown (not the alarm button) to Position 1. Alarm will sound when
hour hand passes alarm hand.
note: Do not expose watch to moisture when alarm button is pulled out. Push
in alarm button to stop alarm at any time. If alarm button is not pushed in,
alarm will sound once, pause and then sound ten times and stop. Push alarm
button in to stop or alarm will sound again in 12 hours.
47