Checking The Power Reserve - Wenger 70100 Instruction Booklet

seTTIng The alarm, aCTIvaTIng IT and
38

CheCKIng The poWer reserve

The Alarm indicator hand is the hand with the larger of the two arrows.
This hand indicates the time at which the alarm would sound once activated.
1. Pull out the crown to Position 3, then push in the crown one «click» to
Position 2. Turn the crown counterclockwise. The alarm indicator hand will
rotate. You will note 15-minute increments on the dial (15, 30, 45) to help
you set a precise time for the alarm to activate between the hour markings.
2. Push the top pusher. The small indicator hand in the left subdial will indi-
cate the battery strength for the alarm and movement. It will then move
automatically to the «ON» position. The alarm will now activate at the time
set.
3. Return the crown to position 1.
4. When the alarm sounds, push the top pusher to turn it off.
note: The Alarm can be turned off or deactivated at any time by pushing the
top pusher until the left subdial's indicator hand moves to the «OFF» position.