Pilot Series Watches; Setting The Time And Date - Wenger Clock Instruction Manual

Pilot Series
12-hour subdial
Minute subdial
9:00 Crown
Internal rotating
bezel
Strap or bracelet
14
Top pusher
Seconds timer
I
II
12
50 10
40 20
3:00 Crown
4
8
7 5
Bottom pusher

Setting the Time and Date

Follow instructions on p.6.
Internal Rotating Bezel on Pilot Series (Not on all models)
1. Elapsed Time
a. Rotate the 9:00 crown counterclockwise until the zero mark (yellow
triangle) is at the minute hand.
b. The position of the minute hand in relation to the zero mark on the
bezel will indicate the total number of minutes elapsed.
2. Dual Time Zone
Rotate the black bezel ring by turning the 9:00 crown until the hour hand points
nd
to the 2 time zone time (example: local time is 1:00 and second time zone
time is 7:00; rotate black bezel ring until "7" lines up with "1" on the dial).
3. Countdown Timer
a. Using the minute hand as a starting point, rotate the 9:00 crown to position
the yellow triangle at the desired finish point.
b. The minute hand will indicate how many minutes are remaining on the
white dial.
15