Still Mode; Switchingeach Input Mode; Switchingaudiomode - Magnavox 32MF338B User Manual

[] Still Mode
Youcanpausethe imageshown on the TVscreen.
[] Switching Audio Mode
Thissection describes h owto switch the audioin the analog modeand how
to switchthe audiolanguage in the digital mode.
Press [FREEZE] to pause the image shown on the TV
screen.
FREEZE
, The sound outputwill not be paused.
, If no signal is detected or protected signal is received
during still mode, the image remains paused and the
sound output will be muted.
, The still function will be released after 5 minutes.
To cancel still mode, press any button except [POWER O].
Press [SAP] to display the currently selected audio
mode. While receiving an MTS broadcast, press
repeatedly to cycle through the available audio
channel.
SAP
When all audio are available
When stereo and monaural audio are available
[] Switching Each Input Mode
Youcaneasily switchwith the remotecontrol to the DTV(ATSC) and TV
(NTSC) o r to access external devices when they are connectedto the TV.
When SAP and monaural audio are available
When only monaural audio is available
Press [SOURCE] or [CH. @] repeatedly to cycle through
the input modes.
DTV/TV channel
!
SOURCE
OF
!
I
I
I
I
Pressing [CH.--] reverses the direction of the input
modes.
To use the video or S-video input jack of VIDEO1 on
the TV, select "Videol ".
To use the video or S-video input jack of VIDEO2 on
the TV, select "Video2".
To use the component video input jacks of
COMPONENT1 on the TV, select"Componentl".
To use the component video input jacks of
COMPONENT2 on the TV, select"Component2".
To use the HDMI1 input jack on the TV, select
"HDMII".
To use the HDMI2 input jack on the TV, select
"HDMI2".
To use the PC input jack on the TV, select "PC".
STEREO
SAP
MONO
(Cannot be switched)
: Outputs stereo-audio
: Outputs second audio program
: Outputs mono-audio
_ Press [SAP] to display the currently selected language
and the number of available languages.
SAP
_ Press [SAP] repeatedly to cycle through the available
audio languages.
SAP
Available languages differ depending on the
broadcast."Other" is displayed when the audio
language cannot be acquired, or the acquired
languages are other than English, Spanish or French.
Note:
• Pressing [SAP] does not control external audio devices.
o The information display will automatically disappear in a
few seconds.
EN