Page 1
User Manual Manuel de l’utilisateur Guía del usuario 32MF338B LCD TV Quick Use Guide Inside! Guide d’usage Rapide Incluse! Guía de Uso Rápido Incluida! For Customer Use / À l’usage du client / Para Uso del Cliente Model/Modle/ModeloNo. : Serial/Srie/Serie No. A8AF2UH_32MF338 B_EN_v2.indd 1 A8AF2UH_32MF338 B_EN_v2.indd 1 2008/02/15 14:52:13...
Page 2
Return your Product Registration Card or register online at www.magnavox.com/usasupport today to get the very most from your purchase. Registering your model with MAGNAVOX makes you eligible for all of the valuable benefits listed below, so don’t miss out. Complete and return your Product Registration Card at once, or register online at www.magnavox.com/usasupport to ensure: *Proof of Purchase *Additional Benefits *Product Safety...
NTRODUCTION IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment Read these instructions. Tilt/Stability - All televisions must comply with Keep these instructions. recommended international global safety standards for tilt Heed all warnings. and stability properties of its cabinet design. Follow all instructions. •...
Page 4
NTRODUCTION FCC WARNING This apparatus may generate or use radio frequency energy. Changes or modifications to this apparatus may cause harmful interference unless the modifications are expressly approved in the manual. The user could lose the authority to operate this apparatus if an unauthorized change or modification is made. RADIO-TV INTERFERENCE This apparatus has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Supplied Accessories user manual registration card remote control batteries Phillips pan M4 x (1EMN22919) (1VMN23233A) (NF800UD) (AAA x 2) 10mm screw for mounting the stand x 3 (FPH34100) • If you need to replace these accessories, please refer to the part No. with the illustrations and call our toll free customer support line found on the cover of this manual.
NTRODUCTION Features Contents INTRODUCTION • DTV/TV/CATV You can use your remote control to select Important Safety Instructions ........3 channels which are broadcast in digital format and Supplied Accessories .
Buttons on the Remote Control 1. POWER y y (p14) 11. MENU (p15) Press to display the main menu. Press to turn the TV on and off. 2. SOURCE (p18) 12. OK (p14) Press to access connected Press to decide the command of setting when the main menu is external devices like a DVD player or VCR.
NTRODUCTION Control Panel 1. y POWER (p14) Press to turn the TV on and off. side of this TV 2. SOURCE (p18) • Press to access connected external devices like a DVD player or VCR. • Press to decide the command of setting when the menu is displayed.
REPARATION Cables not included. Please purchase the necessary cables at your local store. Basic Connection This section describes how to connect the TV to an antenna, cable receiver/satellite box, etc. Note: • Be sure your antenna or other device is connected properly before plugging in the power cord. [Antenna Connection] Connect the RF coaxial cable on your home outlet to the antenna input jack of this TV.
REPARATION Cables not included. Please purchase the necessary cables at your local store. External Device Connection [HDMI Connection] HDMI (High-Definition Multimedia Interface) transports high definition video and multi-channel digital audio through a single cable. It ensures that the content sent from the source to the TV is of the highest possible resolution. Use an HDMI cable to connect the TV to external video devices equipped with HDMI output jack.
Page 11
Cables not included. Please purchase the necessary cables at your local store. [Component Video Connection] Component video connection offers better picture quality for video devices connected to the TV. Use a component video cable to connect the TV to external video devices equipped with component video output jacks.
Page 12
REPARATION Cables not included. Please purchase the necessary cables at your local store. [Video in Connection] It offers standard picture quality for video devices connected to the TV. Use an video cable to connect the TV to external video devices equipped with video output jack. If you connect to the TV’s VIDEO1 or VIDEO2 video input jack, connect an audio cable to the audio L/R jacks of VIDEO 1 or VIDEO 2 accordingly.
Page 13
Cables not included. Please purchase the necessary cables at your local store. [PC Connection] This TV is equipped with a PC input jack. If you connect this TV to your PC, you can use this TV as a computer monitor. e.g.) VGA cable should be rear of this TV...
NITIAL SETTING These operations are accessible by remote control. Some may also be accessible by controls on the main TV. Initial Setup Note: • If you connect the cable system directly, contact the CATV This section will guide you through the TV’s initial setting which includes installer.
Main Menu Autoprogram This section describes the overview of the main menu displayed when you If you switch wires (e.g., between antenna and CATV) or if you move the TV press [MENU]. For more details, see the reference page for each item. to a different area after the initial setting, or if you restore the DTV channel The main menu consists of the function setting items below.
NITIAL SETTING Language Selection Note: You can choose English, Spanish, or French as your on-screen language. • After setting “Autoprogram”, using [CH. ] on the remote control skips unavailable programs automatically. • If you connect the cable system directly, contact the CATV installer.
ATCHING TV Channel Selection Volume Adjustment Select channels by pressing [CH. ] or [the Number buttons]. This section describes how to adjust the volume. The mute function, which turns the sound off and on, is also described. • To select the memorized channels, use [CH. ] or Use [VOL.
ATCHING TV Still Mode Switching Audio Mode You can pause the image shown on the TV screen. This section describes how to switch the audio in the analog mode and how to switch the audio language in the digital mode. Press [FREEZE] to pause the image shown on the TV Press [SAP] to display the currently selected audio screen.
Screen Information You can display the currently selected channel or other information such as the audio mode on the TV screen. In the digital mode, the detailed broadcasting information for the current In the analog mode, the current channel number and the audio mode are channel such as program title, program guides are displayed.
ATCHING TV TV Screen Display Mode 4 types of display modes can be selected when the broadcasting station is sending 4:3 or 16:9 video signal. And 3 types of display modes can be selected for PC input signal. For 16:9 video signal Press [FORMAT] repeatedly to switch the TV aspect ratio.
PTIONAL SETTING Channel List Add Channels The channel list function lets you remove undesired channels from the This function lets you add the channels that were not added by the channel registration list. autoprogram due to the reception condition at the initial setting. Press [MENU] to display the main menu.
PTIONAL SETTING Antenna Confirmation This function lets you check the digital signal strength of each channel. Press [MENU] to display the main menu. Use [Cursor K / L] to select “SETUP”, then press [OK]. EXIT Autoprogram PICTURE Channel List SOUND Add Channels SETUP Antenna...
Picture Adjustment Cursor Cursor You can adjust brightness, contrast, color, tint and sharpness. Brightness to decrease to increase Brightness brightness brightness Adjust Move Press [MENU] to display the main menu. Contrast to decrease to increase Contrast contrast contrast Adjust Move Use [Cursor K / L] to select “PICTURE”, then press [OK].
PTIONAL SETTING Sound Adjustment Reset Sound Settings Use [Cursor K / L] to select “Reset to default”, then You can adjust treble and bass. press [OK] to restore the sound settings to the default. Press [MENU] to display the main menu. EXIT PICTURE Reset to default...
Closed Caption Caption Mode CC-1 and T-1; You can view closed captioning (cc) for TV programs, movies and news. are the primary caption and text services. Closed caption refer to text of dialogue or descriptions displayed on-screen for the hearing impaired. The captioning or text is displayed in the same language as the program’s dialogue (up to 4 lines of script on the TV screen, where it...
PTIONAL SETTING DTV Closed Caption In addition to the basic closed caption described on page 25, DTV has its own closed caption called DTV CC. Use this menu to change the settings for DTV CC. Use [Cursor K / L] to select the desired DTV closed Press [MENU] to display the main menu.
CC Style You can change the CC style such as font, color or size, etc. Use [Cursor K / L] to select “On”, then press [OK]. Press [MENU] to display the main menu. EXIT User Setting PICTURE Font Style SOUND Font Size SETUP Font Color...
Page 28
PTIONAL SETTING Font Color Edge Type Font color of the displayed caption can be switched as Edge type of the displayed caption can be switched as below. below. EXIT User Setting EXIT User Setting None PICTURE Font Style White PICTURE Font Style Raised SOUND...
Parental Control Parental control reads the ratings for programs, then denies access to the programs which exceed the rating level you set. With this function, you can block certain programming inappropriate for children. See the following description for setting each item. Press [MENU] to display the main menu.
Page 30
PTIONAL SETTING A. US Movie ratings lock A. US Movie ratings lock B. US TV ratings lock B. US TV ratings lock US Movie ratings lock is the rating system created by MPAA (Motion Picture Association of America). Use [Cursor K / L] to select “US Movie ratings lock”, Use [Cursor K / L] to select “US TV ratings lock”, then then press [OK].
Page 31
C. Change PIN C. Change PIN Although the default code “0000” is supplied with the TV, you can set your own PIN cord. Rating Category Use [Cursor K / L] to select “Change Pin”, then press [OK]. TV-MA Mature audience only higher TV-14 Unsuitable for children under 14...
PTIONAL SETTING PC Settings This function lets you adjust the PC screen position, clock and phase during PC input. Adjust the setting. Press [MENU] to display the main menu. Auto Adjustment Use [Cursor K / L] to select “Adjust”, then press [OK]. Use [Cursor K / L] to select “FEATURES”, then press EXIT Cancel...
HDMI Audio You can set the method of sound input for the HDMI1 input jack. Note: Press [MENU] to display the main menu. • Select “Auto Detect” or “DVI” if you have connected a DVI device to the HDMI1 input jack. Use [Cursor K / L] to select “FEATURES”, then press [OK].
ROUBLESHOOTING Troubleshooting Guide If the TV does not perform properly when operated as instructed in this User Manual, check the following chart and all connections once before calling for service. Symptom Remedy • Be sure the power cord is plugged in. No power •...
Question Answer • Check the antenna or cable connection to the main TV. • Check the batteries of the remote control. • Check if there is an obstacle between the infrared sensor window and the remote control. • Test the signal output. If OK, then possible infrared sensor trouble. (Refer to “IR Signal Check”...
NFORMATION Glossary ATSC Dolby Digital Acronym that stands for Advanced The system developed by Dolby A stored 4-digit number that allows Television Systems Committee and Laboratories to compress digital access to parental control features. the name of the digital broadcasting sound.
MAGNAVOX LIMITED WARRANTY NINETY (90) DAY LABOR / ONE (1) PARTS WARRANTY COVERAGE: one other than Magnavox or Magnavox Authorized Service MAGNAVOX warranty obligation is limited to the terms set Location, (c) to a product or a part that has been modified forth below.