Hardware Specifications; Interface Specifications; Environmental Requirements - Watchguard Firebox X5000 Hardware Manual

Hardware Specifications

This table shows the hardware specifications for the Firebox® X
Peak.
Processor
Memory - Flash
Memory - RAM
Cache
Power supply
System Bus
Dimensions
Weight
Current
Heat dissipation

Interface Specifications

This table shows the interface specifications for the Firebox® X
Peak.
Network interfaces
Serial ports
USB ports

Environmental Requirements

We recommend that you uses these guidelines to install your
Firebox® X Peak device safely:
• Install in a network rack
Firebox X Peak Hardware Guide
Hardware Specifications
2.8 GHz Intel based Processor
128 MB
512 MB
512 KB Level 2
100-240 VAC
Autosensing
PCI-X 64-bit, 66Mhz and
PCI 32-bit, 33Mhz
D=13.5" (34.29 cm)
W=16.75" (42.55 cm)
H=1.75" (4.45 cm)
12 lbs (5.44 Kg)
1.2Amps @ 115VAC
471 BTU/hour
7 x 10/100 Mbps Fast Ethernet
auto-negotiate (half/full duplex) RJ-45
3 x 10/100/1000 Gigabit Ethernet,
auto-negotiate (half/full duplex), RJ-45
2 DB9 (1 front, 1 rear)
1 USB 2.0
3