Kobalt KBT2000 Manual page 2

5
Set-up
Connect garden hose to pressure
washer water intake.
Assemble pressure washer gun to spray wand.
Connect desired pressure tip.
• Take one end of the hose off the holder.
• Remove the high pressure hose
completely from hose reel, then take the
other hose end off the holder.
(REFER
TO
MANUAL PAGE 14)
Insert high pressure hose into trigger
handle.
onnectih- e iTigh pressure hose to th
water outlet connector.
Turn on water at outlet.
Run water hose for 120 seconds with the
motor in OFF position. This helps drain air
from the tank and lines.
Connect power cord to wall outlet
Extension cord not recommended.
Turn on Pressure Washer
IMPORTANT: Ensure wateJ outlet is On
before turning power On to avoid damage
to the pump.